Specifications - Stanton T.12O Operating Instructions Manual

PART NAMES AND FUNCTIONS
20) EXTRA STYLUS HOLDER
Place extra headshells here.
21) PHONO/LINE OUTPUT L & R
This is the standard analog output (RCA jacks) which can be connected either to a phono or line input on
any DJ mixer, depending on the setting of the phono / line selector.
22) PHONO/LINE SWITCH
23) POWER CORD CONNECTOR
Used to connect the included power cord.
24) POWER SWITCH
This switch turns the power on or off, including the motor and audio signal.

SPECIFICATIONS

APPLICATION:
This specification applies to the direct drive turntable unit T.120
STANDARD TEST CONDITION:
Ambient Temperature
Relative Humidity
NOTE: Measurements can be carried out between 5 degC to 35 degC and 45% to 85% relative humidity.
TURNTABLE SECTION:
Type
Motor
Speeds
Wow and Flutter
Pitch Controls
Starting Torque
Starting Time
Braking Time
Braking System
Pitch Bend
Time for Speed Change
Audio Output
21 22 23 24
20 +/- 2 degC
65% +/- 5%
3-speed full manual
16pole, 3phase,brushless DC motor
33 / and 45rpm and 78rpm
1
3
Less than 0.1% WRMS (JIS WTD) with 33
+/- 8%, +/-25%, +/-50%
More than 4.5kgf.cm
0.2~6 sec.(Adjustable)
0.2~6 sec.(Adjustable)
Electronic brake
+/-6%
Less than 0.2 sec. from 33
Less than 0.2 sec. from 45 to 33
Less than 0.5 sec. from 33
Phono/Line output
/ rpm
1
3
/ to 45 rpm.
1
3
/ rpm.
1
3
/ to 78 rpm
1
3