Product Information; Installation; Voltage Specification - Flash F9000384 User Manual

3. PRODUCT INFORMATION

Power supply voltage: 120-230V, DC9V, 1A
Power Input: DC+9-12V
Dimension [cm]: H-7,3 W-48,2 D-13,2
3.1 Main Features
 192 DMX Channels
 30 Banks each composed of 8 program-
mable scenes.
 8 fades adjusting output level.
 Built-in Microphone.
 AUTO mode is controlled by TAP SYNC
and SPEED controlled.
 MIDI control through MIDI interface.
 4 digits LED display.
 Fird digit of LED shows CHASES, the
second digit of LED shows scenes.

4. INSTALLATION

Make sure all necessary cables are
properly connected. Always ensure that
the unit is firmly fixed to avoid vibration
and slipping while operating. Always
ensure that the structure to which you
are attaching the unit is secure and is
able to support a weight of 10 times of

4.1 Voltage specification

Input Voltage
120-230V
192 DMX CONTROLLER 192CH 2019 • Art No F9000384
Weight [kg]: 2,5kg
Type of packaging: Carton Box
 Third and fourth digit of LED shows
BANKS.
 The second, third, fourth digit of LED
show steps or 0-255 or TIME.
 Blackout master controlled by M annual
or R emonte.
 CHASE programming and CHASE
running, manual control and remonte
control.
 Fade Time control.
 DMX polarity selects
the unit's weight. Also always use a safety
cable that can hold 12 times of the weight
of the unit when installing the fixture. The
equipment must be fixed by professionals.
And it must be fixed at a place where is out
of the touch of people and has no one pass
by or under it.
Total Power
2W
Frequency
50/60Hz