Operating Instructions - NewAir NPR122GA00 Owner's Manual

EN

OPERATING INSTRUCTIONS

Power supply: Connect to 12V/24V DC power, 100~240V AC power (using the
adapter) or solar (12V~50V).
Display Screen Initialization: When the fridge is connected to the power
supply, the buzzer will make a long beep, and the display will be on for two
seconds then enter the normal operating mode.
Power On/Off: Press to switch ON and hold for three seconds to switch OFF.
+
Temperature Setting: Press and at the same time for three seconds to
–
switch ON/OFF the left compartment, press and at the same time for
three seconds to switch ON/ OFF the right compartment, two compartments
cannot be switched off at the same time.
+ -
When both left and right compartments are set in running state, press or to
+
enter left compartment temperature setting. Press to increase temperature,
-
press to decrease temperature, and press to switch left/right
compartment. The setting will be saved after stop operating for four seconds
(Note: the temperature displayed is the current temperature of the
compartments, it'll take a while to reach the set temperature.) Temperature
setting range: -20 ~ 20 o C (-4 ~ 68 o
F)
Cooling Mode: Press to switch MAX (fast cooling) and ECO (Energy saving
Mode) (*Factory setting is MAX.)
www.newair.com
11