Aqualine SL280 Installation Procedure

Installation Procedure SL280
Long screws
Wall anchors
Main body
Faucet
Adoring covers

Flat Wall Installation:

1.Drill 7 holes
2.A.Insert wall anchors
B.Tie the PTFE tape up the joints
C.Fix the fixed base with the long screw
D.Fix the upper mounting bracket
3.A.Screw the faucet to the joints
B.Insert the fauet to the fixed base
C.Insert the little pellet
D.Insert the main body
E.Fix the main body
upper mounting bracket
F.Connect the shower head
G.Connect the hand shower

Note:

1.Do not forget to use the mesh gasket
2.If find that water pressure or water volume is unsual,please clean the mesh gasket
Fixed base Small screws
Little pellet
Shower head
inside the holes.
,and screw the joints
onto the wall.
with the long screw
placing the mesh gaskets
,and fix them with small screws
to the faucet for fixing.
to the faucet through the ring
into the upper mounting bracket
.
to the main body
and faucet to the shower hose
to prevent leakage on the connection.
Shower hose
Upper mounting
Jionts
bracket
to the water inlet.
onto the wall.
in the water inlet.
.
, fixed it by small screw
.
placing the gaskets
Hand shower Gaskets
Mesh gaskets
Ring
,Push the adoring covers
in the fastening nuts
regular
GB
Small screws
onto the