Smeg CB2485U Manual page 10

INSTALLATION INSTRUCTION
Push the appliance carefully into the cabinet, make sure
the appliance is centered in the cavity. Follow the steps
below to fit the cabinet door panel, ensuring the door
can be opened and closed properly then tighten the
screws at the top and bottom.
Fitting the cabinet door bracket
Remove the white decorative cover
Fig. 1- by lifting it upwards.
Fig. 2- Obtain the below measurements:
Dimension B= Measure from the underside surface of
cabinet ceiling to the bottom of fixing bracket.
Dimension C= Determine which gap
you need between the cabinet ceiling or panel above.
Fig 1
Often this will align with the adjacent cabinet doors.
Fig. 3 - Fitting the decor door bracket
Subtract C from B and put the fixing bracket (2) in place
using this measurement for vertical position and center
horizontally.
Secure the fixing bracket (2) using screws (1) x8.
Fig 2
Fig. 4 - Fitting the cabinet door
Place the cabinet door onto the appliance door by
inserting adjustment bolts into the slots on the fixing
bracket. Locate the washers and screw the nuts onto the
adjustment bolts. Do not tighten fully yet.
Fig 3
Fig 4
9