YDLIDAR X4 Lidar User Manual page 5

(UART) to USB signal conversion. Its driver can be downloaded from our official website or
downloaded from the official website of Silicon Labs.
https://www.ydlidar.com/dowfile.html?id=97
http://cn.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
After decompressing the driver package, run the CP2102's Windows driver installation file (exe
file under CP210x_VCP_Windows). Please select the 32-bit version (x86) or 64-bit version (x64)
installation program according to the version of the windows operating system.
Double-click the exe file and follow the prompts to install it.
After the installation is complete, right-click on [My Computer] and select [Properties]. On the
open [System] screen, select [Device Manager] from the left menu to access the [Device Manager].
Copyright 2017 EAI All Rights Reserved
FIG 5 YDLIDAR X4 DRIVER VERSION SELECTION
FIG 6 YDLIDAR X4 DRIVER INSTALLING
3 / 13