Sony TRINITRON PVM-14N5A Service Manual page 18

Using On-Screen Menus
Operation through On-Screen
Menus
Menu operation buttons
There are four menu operation buttons on the front
panel of the monitor.
MENU/
ENTER
EXIT
1 MENU/EXIT button
4 ENTER button
3 > button
2 . button
Button functions depend on the displayed menu. The
following table shows the button functions on the item
selection menus and adjustment and setting menus.
Button Function on the Function on the
item selection adjustment and
menus setting menus
1 MENU/EXIT
To return to the To return to the
regular screen. item selection
menu.
2 . To move the cursor To decrease value/
downward. select item.
3 >
To move the cursor To increase value/
upward. select item.
4 ENTER To decide a To decide a
selected item. selected item a) .
a) You can use the ENTER button only on the 2d USER
MEMORY menu of the adjustment and setting menus.
10
Usable buttons depend on the displayed menu. Buttons
that can be used on the menu are displayed at the
bottom line of the screen. You can perform menu
operation using displayed buttons.
Menu
Usable buttons
Usable buttons
Display of the usable menu operation buttons
Operating procedures
To display the menu, follow this procedure.
1
Press the MENU/EXIT (1) button.
1 MENU 1 appears.
To select items other than ones not displayed on
MENU 1
Select 2 MENU 2.
For details of how to select, see the "To change the item
selection menus" described later.
2
Move the cursor to the desired item by pressing the
. or > (2, 3) button.
3
Press the ENTER (4) button.
The adjustment and setting menu selected in step 2
appears.
For detailed information of menus, see "Functions of On-
Screen Menus" on page 11.
To change the item selection menus
Select NEXT PAGE on the menu to display next item
selection menu and PREVIOUS PAGE on the menu to
display the previous item selection menu.
MENU 1 MENU 2
: When selecting NEXT PAGE
: When selecting PREVIOUS PAGE
How to change the item selection menu
To return to the item selection menu from the
adjustment and setting menus
Press the MENU/EXIT (1) button on the currently
displayed adjustment and setting menu.
To close the menu (to return to the regular
screen)
Press the MENU/EXIT (1) button when the item
selection menu is displayed. The on-screen menu
disappears and the regular screen appears.
Functions of On-Screen Menus
Item selection menus
1 MENU 1
MENU 1 menu has the following selection items.
Item Functions
VOLUME To obtain the desired volume
CONTRAST To adjust the contrast
BRIGHTNESS To adjust the brightness
CHROMA To adjust the color intensity
To adjust the phase
PHASE
2 MENU 2
MENU 2 menu has the following selection items.
Item Function
COLOR SELECT To select the color system of the
input signal
DISPLAY To select period of display
LANGUAGE To select the menu language
USER MEMORY To store and recall the values and
settings adjusted by a user, and recall
the factory-settings
Adjustment and setting menu
1a VOLUME menu (Factory setting: 50)
Adjust the speaker volume.
The volume increases by pressing the > button.
The volume decreases by pressing . button.
1b CONTRAST menu (Factory setting: 80)
Adjust the contrast of the screen.
The contrast becomes higher by pressing the > button.
The contrast becomes lower by pressing . button.
11