Table of Contents
Advertisement
STEP 5 Connect Power Supply
to Booster
Connect the 12V power supply cord to the end
of the booster, labeled "12V DC" then plug the
power adapter into vehicle's 12V DC power
supply. Push switch to ON position. If your
Drive Reach is working correctly, the light on
the booster will be green. Use only the power
supply provided in this package.
NOTE: If the 12V Cigarette Lighter port on
your car is always on (even when your vehicle
is turned off) and you will be parking for
extended periods of time (more than a day), we
recommend you turn the booster off by pushing
power cord switch to OFF position. This will
prevent the Drive Reach from draining the
battery in your vehicle.
9
connect Power
Supply Cord
Advertisement
Table of Contents
