2. Plug in the Wireless Subwoofer, and then check its standby status.
• Plug the Wireless Subwoofer power cord into an electrical outlet and into the Wireless
Subwoofer to turn on the Wireless Subwoofer. The LINK LED indicator (blue LED) on the Wireless
Subwoofer blinks. If the LED does not blink, press the ID SET button on the rear of the Wireless
Subwoofer with a pen tip for 5~6 seconds until the LINK LED indicator blinks (in Blue). For more
about the LED, please refer to the SWA-W500 user manual.
• The main unit is heavy. Be careful not to pinch your fingers when pressing the ID SET button or
connecting the power cord to the rear of the unit.
• The upper part of the subwoofer is prone to scratches. Handle it carefully.
Green → Blue in turn.
Rear Speaker, Woofer Pairing button
•
Speaker Unit on the bottom of the
body. You can deform or damage the
speaker.
3.
remote control for 5 seconds.
• Until pairing is complete, the
Multicolour LED changes as Red →
ENG - 17
Do not press on or strike the
Press the Up button on the
LED Indicator