Page 1
Uputstvo za upotrebu (EN) SAMSUNG soundbar zvučnik HW-S60B/EN Tehnoteka je online destinacija za upoređivanje cena i karakteristika bele tehnike, potrošačke elektronike i IT uređaja kod trgovinskih lanaca i internet prodavnica u Srbiji. Naša stranica vam omogućava da istražite najnovije informacije, detaljne karakteristike i konkurentne cene proizvoda.
Page 2
FULL MANUAL HW-S60B / HW-S61B / HW-S68CB Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register...
Page 3
Refer to the table below for an explanation of CAUTION symbols which may be on your Samsung product. • Do not expose this apparatus to dripping or splashing. Do not put objects filled with CAUTION liquids, such as vases, on the apparatus.
Page 4
This equipment generates, uses and approved recycler. To find the nearest recycling can radiate radio frequency energy and, if not location, go to our website:www.samsung.com/ installed and used in accordance with the recycling Or call, 1‐800‐SAMSUNG instructions, may cause harmful interference to radio communications.
Page 5
7. Do not block any ventilation openings. 14. Refer all servicing to qualified service Install in accordance with the manufacturer’s personnel. Servicing is required when the instructions. apparatus has been damaged in any way, 8. Do not install near any heat sources such as such as power-supply cord or plug is radiators, heat registers, stoves, or other damaged, liquid has been spilled or objects...
Page 6
4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use.
Adjusting the Soundbar volume with a TV remote control ------------------------- Connecting the Soundbar Connecting Electrical Power (HW-S60B/S61B model) ------------------------- Connecting the Samsung Wireless Rear Kit and Subwoofer to your Soundbar (HW-S60B and HW-S61B ) ------------------------- Connecting the power and units (HW-S68CB model) -------------------------...
Page 8
Connecting an External Device Connecting using an Optical Cable ------------------------- Connecting a Mobile Device Method 1. Connecting via Bluetooth ------------------------- Method 2. Connecting via Wi-Fi (Wireless Network) ------------------------- Using the Tap Sound ------------------------- Connecting via Apple AirPlay 2 Installing the Wall Mount Installation Precautions ------------------------- Wallmount Components...
• For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Bottom of the Soundbar Main Unit) • To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care.
02 PRODUCT OVERVIEW Front Panel / Top Panel of the Soundbar Top Panel The LED Indicator flashes, glows, or changes color depending on the Soundbar's current mode or status. The color of the LED indicator and the number of lights indicate the active mode as described below.
Page 11
Press the (Mic On/Off) button to turn the microphone on or off. When the microphone is off, the LED Indicator will light red. Red On On/Off LED Indicator Button “ “ Mic Off” Mic On” • When you plug in the AC cord, the power button will begin working in 4 to 6 seconds. •...
Bottom Panel of the Soundbar DC 19V DIGITAL AUDIO IN DC 19V DIGITAL (OPTICAL) AUDIO IN (OPTICAL) SERVICE HDMI SERVICE (ARC) HDMI (ARC) DIGITAL AUDIO IN (OPTICAL) DC 19V HDMI (ARC) SERVICE DC 19V (Power Supply In) Connect the AC/DC power adapter. (See page 19) SERVICE Connect a USB storage device to upgrade the product's software.
03 USING THE REMOTE CONTROL Inserting Batteries before using the Remote Control (AAA batteries X 2) Slide the back cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries (1.5V) oriented so that their polarity is correct.
Page 14
(Mute) Press the (Mute) button to mute the sound. Press it again to unmute the sound. Blinks X Repeatly Indicator Volume Push the button up or down to adjust the volume. White moves to right X1 White moves to left X1 Indicator Volume Up Volume Down...
Page 15
(Sound Control) By pressing the button, you can set the audio function. The desired item can be adjusted using the Up/ Down buttons. Each time the mode changes, the Multicolor LED blinks in white. White Blinks X1 Indicator “SpaceFit Sound” ...
Page 16
Up/Down/Left/Right Press Up/Down/Left/Right on the button to select or set functions. • Music Skip Press the Right button to select the next music file. Press the Left button to select the previous music file. • ID SET Press and hold the Up button for 5 seconds to complete ID SET (when connecting to a wireless subwoofer or wireless rear speakers).
Active Voice Amplifier (AVA) • Analyzes external noise in real time while soundbar is playing, so that voice audio can always be heard clearly. • No data is saved during the analysis. Using the Hidden Buttons (Buttons with more than one function) Hidden Button Reference page Remote Control Button Function...
5.1 ch 7.1 ch • The Samsung Wireless Rear Speaker Kit, and Subwoofer can be purchased separately. To purchase a Kit or the Subwoofer, contact the vendor you purchased the Soundbar from. • When the input source is Dolby Atmos® the Subwoofer-only setup provides 5.1 channel audio, while the Subwoofer &...
• Set the TV speaker to External Speaker to use this function. • Manufacturers supporting this function: Samsung, VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA 1. Turn Off the Soundbar. 2. Push up and hold the WOOFER button for 5 seconds.
Connecting the Samsung Wireless Rear Kit and Subwoofer to your Soundbar (HW-S60B and HW-S61B ) Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA-9100S or SWA-9200S, sold separately) and Wireless Subwoofer (SWA-W510, sold separately) to your Soundbar.
Connecting the power and units (HW-S68CB model) Use the power components to connect the Subwoofer and Soundbar to an electrical outlet in the following order: • For more information about the required electrical power and power consumption, refer to the label attached to the product.
Page 22
3. Connect power to the Soundbar and Subwoofer. The Subwoofer is automatically connected when the Soundbar is turned on. Blue is On NOTES • Connect power to the Subwoofer first. The Subwoofer will be automatically connected when turning on the Soundbar. •...
Page 23
3. Press and hold the Up button on the remote control for at least 5 seconds. → → Green Blue Blinks 5 Sec • The Soundbar will automatically power on when ID SET is complete. 4. Check if the LINK LED is solid blue (connection complete). The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the...
Page 24
Red and blue See the contact information Blinking Malfunction for the Samsung Service Center in this manual. NOTES • Before moving or installing this product, be sure to turn off the power and disconnect the power cord. • If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the STANDBY LED on the rear of the sub-woofer will turn red after blinking blue several times.
05 CONNECTING TO A TV Connecting the TV that supports HDMI ARC (Audio Return Channel) CAUTION • When both the HDMI cable and optical cable are connected, the HDMI signal is received first. • To connect the HDMI cable between the TV and Soundbar, be sure to connect the terminals marked ARC.
Page 26
NOTES • When you connect the TV that supports the HDMI ARC (Audio Return Channel) to the Soundbar with an HDMI cable, you can transmit the digital video and audio data without connecting a separate optical cable. • We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose diameter is less than 0.55 inches (14 mm).
Connecting using an Optical Cable Pre-connection Checklist • When both the HDMI cable and optical cable are connected, the HDMI signal is received first. • When you use an optical cable and the terminals have covers, be sure to remove the covers. Optical Cable (not supplied) DIGITAL AUDIO IN...
3. Select “S-Series Soundbar” from the list on TV’s screen. An available Soundbar is indicated with “Need Pairing” or “Paired” on the TV’s Bluetooth device list. To connect the Samsung TV to the Soundbar, select the message, and then establish a connection.
Page 29
(Source) button on the remote control to select the mode other than “Bluetooth”. • Disconnecting takes time because the Samsung TV must receive a response from the Soundbar. (The time required may differ, depending on the Samsung TV model.) Notes on Bluetooth connection •...
Connecting via Wi-Fi Pre-connection Checklist • Wi-Fi connection is available only on Samsung TV. • Check whether the wireless router (Wi-Fi) is turned on and the TV is connected to the router. • The TV and Soundbar must be connected to the same wireless network (Wi-Fi).
Connecting to a TV that supports Dolby Atmos® Pre-connection Checklist • Dolby Atmos® is supported in "TV ARC" or "Wi-Fi" mode. • Make sure that the content supports Dolby Atmos®. Connect to the HDMI IN (ARC) or (eARC) port of your TV. Connect to the HDMI (ARC) port of DIGITAL the Soundbar main unit.
Page 32
Open the audio output options on the settings menu of your BD player or other device and make sure that “No Encoding” is selected for Bitstream. For example, on a Samsung BD Player, go to Home Menu → Sound → Digital Output and then select Bitstream (unprocessed).
Using the Q-Symphony Function For Q-Symphony, the Soundbar syncs with a Samsung TV to output sound through two devices for optimum surround effect. When the Soundbar is connected, the menu, “TV+Soundbar” appears under the Sound Output menu of the TV. Select the corresponding menu.
(Sound Control) → "SpaceFit Sound Off" → ▲ ( Up ) → "SpaceFit Sound On") • This is available in all Sound modes. Method 2. Connecting via TV To enable this function, turn on the Adaptive Sound+ mode on your Samsung TV menu. (Home ( ) → Menu → Settings ( ) →...
06 CONNECTING AN EXTERNAL DEVICE Connecting using an Optical Cable Bottom of the Soundbar Optical Cable BD / DVD player / Set-top (not supplied) DIGITAL box / Game console AUDIO IN (OPTICAL) HDMI (ARC) Top of the Soundbar OPTICAL OUT - AUDIO - White On ->...
07 CONNECTING A MOBILE DEVICE Method 1. Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. • When you connect a paired Bluetooth device with the Soundbar off, the Soundbar automatically turns on.
Page 37
Notes on Bluetooth connection • Locate a new device within 3.28 ft (1 m) to connect via Bluetooth communication. • If asked for a PIN code when connecting a Bluetooth device, enter <0000>. • The Soundbar automatically turns off after 18 minutes in the Ready state. •...
Page 38
Disconnecting the Bluetooth device from a Soundbar You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s user manual. • The Soundbar will be disconnected. • If the Soundbar is disconnected from the Bluetooth device, the multicolor LED indicator on the Soundbar blinks "Red”...
Method 2. Connecting via Wi-Fi (Wireless Network) To connect a Soundbar to a mobile device via a wireless network (Wi-Fi), the SmartThings app is required. The initial connection 1. Install and launch the SmartThings app from your mobile device (smartphone or tablet). 2.
Tap the Soundbar with your mobile device to play audio from the mobile device through the Soundbar. • This function may not be supported, depending on the mobile device. • This function is only compatible with Samsung mobile devices with Android 8.1 or later. SmartThings App...
• This feature may not be available in some countries. • This Samsung Soundbar supports AirPlay 2 and requires iOS 11.4 or later. With AirPlay 2, you can stream music, podcasts, and other audio from your Apple devices to the Samsung Soundbar.
09 INSTALLING THE WALL MOUNT Installation Precautions • Install on a vertical wall only. • Do not install in a place with high temperature or humidity. • Verify whether the wall is strong enough to support the product’s weight. If not, reinforce the wall or choose another installation point.
Wallmount Components 2. Align the Wall Mount Guide’s Center Line with the center of your TV (if you are mounting the Soundbar below your TV), and then fix the Wall Mount Guide to the wall A TYPE : 450mm using tape. Wall Mount Guide (AH81-15186A) •...
Page 44
5. Push a screw (not supplied) through each 7. Install the Soundbar with the attached Holder-Screw, and then screw each screw Bracket-Wall Mounts by hanging the firmly into a support screw hole. Bracket-Wall Mounts on the Holder-Screws on the wall. (Not supplied) 6.
NOTES • Make sure the Soundbar is placed on a flat and solid surface. Samsung may offer updates for the Soundbar’s • Insufficient gap from the TV may cause voice system firmware in the future. recognition and acoustic problems. When an update is available, you can update the...
Reset 1. Go to (www.samsung.com) → search for the model name from the customer support menu option. • For more information about update, refer to Upgrade Guide. 5 Sec 2. Download the upgrade file (USB type). 3. Unzip the file to create a folder with the file name.
Refer to the instructions below if this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864). Soundbar does not turn on.
Page 48
Change the TV’s audio output to ; The Soundbar will not connect if the PCM or Dolby Digital. wireless signal is too weak. Try moving the (For a Samsung TV: Home ( ) → Menu → router closer to the Soundbar, or Settings ( ) →...
13 LICENSE • Use your phone, tablet or computer as a remote control for Spotify. Go to spotify. Dolby, Dolby Atmos, and the double-D symbol com/connect to learn how are registered trademarks of Dolby • The Spotify Software is subject to third Laboratories Licensing Corporation.
Support (1-800-726-7864) to find an answer before you contact a service center for a ENERGY STAR qualified model only (The other repair. models) – As an ENERGY STAR Partner, Samsung has determined that this product or product models meets the ENERGY STAR guideline for energy efficiency. ENG - 49...
AMPLIFIER 120W Rated Output power NOTES • Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. • Weight and dimensions are approximate. Precaution : The Soundbar will restart automatically if you turn on/turn off Wi-Fi. Wi-Fi...
Page 52
LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited...
Page 54
Ovaj dokument je originalno proizveden i objavljen od strane proizvođača, brenda Samsung, i preuzet je sa njihove zvanične stranice. S obzirom na ovu činjenicu, Tehnoteka ističe da ne preuzima odgovornost za tačnost, celovitost ili pouzdanost informacija, podataka, mišljenja, saveta ili izjava sadržanih u ovom dokumentu.