Adjusting The Soundbar Volume With A Tv Remote Control; Connecting The Soundbar; Connecting Electrical Power - Samsung HW-S60T Full Manual

Adjusting the Soundbar volume with a TV remote control

Adjust the Soundbar volume using the TV's remote control.
• This function can be used with IR remote controls only. Bluetooth remote controls (remote
controls that require pairing) are not supported.
• Set the TV speaker to External Speaker to use this function.
• Manufacturers supporting this function:
VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA
1. Turn Off the Soundbar.
2. Push up and hold the WOOFER button for 5 seconds.
Each time you push the WOOFER button up and hold it for 5 seconds, the mode switches in the
following order: "Samsung-TV Remote" (Default mode), "Off-TV Remote", "All-TV Remote".
The LED indicator status changes each time the mode is changed, as shown below.
Remote Control Button

04 CONNECTING THE SOUNDBAR

Connecting Electrical Power

Use the power components to connect the Soundbar to an electrical outlet in the following order:
• For more information about the required electrical power and power consumption, refer to the label
attached to the product. (Label: Bottom of the Soundbar Main Unit)
1. First connect the power cable to the AC/DC adapter.
LED Indicator
"Samsung-TV Remote"
(Default mode)
"Off-TV Remote"
"All-TV Remote"
ENG - 14
Status
Enable a Samsung TV's IR remote
control.
Disable the TV remote control.
Enable a third-party TV's IR remote
control.