Analog Signal Connectors - Sony DMX-R100 Operating Instructions Manual

Analog Signal Connectors

For connection examples, see page 7, for detailed
information on connectors, see "Specifications" on page
110, and for signal flow, see "Block Diagram" on page
121.
Analog Connectors (part 1)
PUSH PUSH PUSH
12 11
13
1 12 11 10
1 12 11 10
1 IN A (analog input A) connectors 1 to 12 (XLR
3-pin)
These connectors are enabled when the INPUT B
button on the analog head amplifier panel is not
pressed.
The IN A 1 to 12 connectors are equipped with 48 V
power for condenser microphones, each channel
feature a front panel 48 V switch
2 IN B (analog input B) connectors 1 to 12 (1/4"
TRS jack)
These connectors are enabled when the INPUT B
button is pressed.
3 INSERTION (insertion input/output)
connectors 1 to 12 (1/4" TRS jack)
Used for connecting external effectors the inserts are
analog and positioned before the analog to digital
converters.
For the pin assignment of the INSERTION connectors, see
page 111.
PUSH PUSH PUSH PUSH
10 9 8 7 6
9 8 7 6
9 8 7 6
PUSH PUSH PUSH PUSH PUSH
5 4 3 2 1
5 4 3 2 1
5 4 3 2 1
INSERTION
Chapter 2 Locations and Functions of Parts and Controls
1 IN A connectors
IN A
2 IN B connectors
IN B
3 INSERTION connectors
31