Patch Cord Cleaning (Ibc™ Cleaner) - JDS Uniphase HP3-60-P4 Quick Start Manual

Clean: patch cord
IbC™ Cleaner
Guide Cap Cover
Guide Cap
1.
Select the appropriate cleaning tool for
the connector type.
2.
Pull off the guide cap cover.
DRY CLEAN
3.
Attach the cleaning tool to the
connector and push the cleaner into the
patch cord 2 times (2 clicks).
4.
INSPECT
5.
Determine whether clean or dirty.
 If clean, do not touch it and
CONNECT.
 If dirty, either repeat DRY cleaning
or go to wETDRY cleaning.

wET DRY CLEAN
6.
Apply fiber optic cleaning solution onto
a clean fiber wipe.
7.
Wipe the end of the fiber connector on
the wet area of the wipe, then
go to STEP 3.
IBYC – Fiber inspection, cleaning & test
Nozzle Nozzle Extender Lock
Guide Cap Cover
Push into patch cord 2 times (2 clicks)
Probe
Inspection
CLEAN
PCM
Inspection
9