InspeCt
buLkhEAD
1.
Select the appropriate bulkhead inspection
tip that corresponds to the connector type
and install onto probe.
2.
Insert the scope into the bulkhead to inspect.
3.
Determine whether clean or dirty.
If clean, do not touch it and CONNECT.
If dirty, and cleaning is required, CLEAN.
PATCh CORD wITh PRObE
1.
Select the appropriate patch cord inspection
tip that corresponds to the connector type
and install onto probe.
2.
Attach the patch cord to the probe.
3.
Determine whether clean or dirty.
If clean, do not touch it and CONNECT.
If dirty, and cleaning is required, CLEAN.
PATCh CORD wITh PCm
The integrated PCM improves workflow by letting
users inspect both the bulkhead and patch cord
quickly and easily. Instantly toggle between probe
and PCM fiber views with the A/B switch.
1.
Select the appropriate patch cord adapter
that corresponds to the connector type and
install onto PCM.
2.
Attach the patch cord to the PCM.
3.
Press A/B switch to activate PCM fiber view.
4.
Determine whether clean or dirty.
If clean, do not touch it and CONNECT.
If dirty, and cleaning is required, CLEAN.
IBYC – Fiber inspection, cleaning & test
Patch Cord
Adapter
A/B Switch
INSPECT
5