Predator 9000 Owner's Manual & Safety Instructions page 24

Troubleshooting (continued)
problem
Product doesn't
1. Product not plugged in properly.
have power.
2. Circuit Breaker tripped.
3. GFCI activated.
4. Product needs service.
Product begins to
1. Problem with appliance.
operate abnormally.
2. Rated load capacity exceeded.
Follow all safety precautions whenever diagnosing or servicing the equipment or engine.
Page 24
possible Causes
For technical questions, please call 1-888-866-5797.
probable Solutions
1. Turn off and unplug the product, then
plug it back in again and turn on.
2. Turn off and unplug product. Reset Circuit
Breaker. Plug in product and turn on.
3. Turn off and unplug product. Test GFCI
receptacle. If functioning properly reset
GFCI, plug in product and turn on.
4. Have product repaired.
1. Immediately unplug appliance. Have
appliance repaired by a qualified
technician, or replace appliance.
2. Lower the number of items plugged into the
Generator to stay within the rated capacity,
or use a more powerful generator.
ITEM 59134