Stagg PMS8A170 UBTR User Manual

IMPORTANT SAFETY INSTRUCTIONS
READ AND KEEP THESE INSTRUCTIONS. HEED ALL WARNINGS.
• This active speaker system must be connected to a mains (AC) outlet to work properly and must be earthed
to operate safely.
• Ensure that correct AC mains voltage and socket - fi tted with a real ground connection - are available
before powering up the unit.
• Check mains power cable and plugs before switching on the equipment. If the mains cable and/or plug are
damaged, replace the whole cable immediately. For your own and other people's safety, never repair or
modify the mains power cable. Dispose of the defective cable properly for waste and recycling purpose.
• After following the instructions outlined above, if your powered speaker fails to function, please contact your
vendor. Under no circumstances should the cabinet be opened. Leave all servicing to qualifi ed personnel.
• Electrical appliances must never be used in conditions of high humidity or heat. To prevent any risk of fi re
or electric shock, never spill or splash liquids on the amplifi er. Should this happen, unplug the power cable
from the mains outlet and switch off the powered speaker immediately.
• May we draw your attention to the instructions printed on the rear panel of the cabinet.
• Make sure that the cabinet is placed or installed in such way that it can never injure people
• Do not place objects which are sources of heat on the speaker cabinet such as lighting equipment
or smoke machines.
WARNING
Exposure to extremely high noise levels may cause permanent hearing damage. Please use this amplifi ed
speaker responsibly for you and your neighbourhood..
CLEANING
Do not attempt to clean the plastic enclosure with solvents or petrochemical based cleaners.
MARKING & CONFORMITY
• The CE mark on this product means it conforms to the EMC Directive (2004/108/CE), CE marking Directive
(93/68/EEC) and Low Voltage Directive (2006/95/EC).
• The "Crossed-out Wheelie Bin" is to draw your attention to the WEEE (Waste Electric & Electronic
Equipment) Directive (2002/96/EC). It means this apparatus must be collected separately for recycling.
• "RoHS compliant" means this device conforms to the (2002/95EC) Directive on the restriction of the use of
certain hazardous substances in electrical and electronic equipment, such as: Mercury, Lead, Cadmium,
Hexavalent Chromium, Polybrominated Buphenyl (PBB) and Polybrominated Diphenyl Ethers (PBDE).
!
220-240
AC VOLTAGE
turn plate if not correct and
change value of fuse
1
3
9
12
2
10
4
5
13
7
11
6
14
8
15
16
FUNCTIONS
1- MP3 player / FM RADIO & Bluetooth controls.
By pushing the mode button you can choose to use the USB /SD card player, listen radio or use the
Bluetooth media transfer, or neither. Before being able to use the FM radio you have to do a scan of
all available radio stations, you can do this by pressing the
It will take a couple of minutes before the radio has stored all stations. Once fi nished you can choose
your preferred radio station by using and
- - - - - till you make a connection from your smartphone. To do so go into your phone settings, go
into Bluetooth, look into the list of unknown available Bluetooth units for the speaker, connect. Once
connected the display on the speaker will show - - - - - -. Then allow your music player in your
smartphone to connect with Bluetooth. Open the MP3 volume to hear the result.
MODE Switch USB / SD
between
Play/Pause
Repeat
Last
Next
2- VOLUME 1: Volume of Microphone / Line inputs
3- VOLUME 2: Volume of line inputs
14- MP3 VOLUME: Volume of USB / SD player, FM radio & Bluetooth
3
2
4
5
7
6
8
15
button till the scan starts.
. In Bluetooth mode the display will show a blinking
FM RADIO BLUETOOTH
Press long for
starting scan
Previous preset
Next preset
1
9
12
10
13
11
14
16