This is a user manual for the Powered Speaker. It contains important safety information as well as the instructions required for the intended use of the device. Please read it carefully before use. Please note that the design and the technical specifications of the device are subject to change without any prior notice.
Page 3
• Read the instructions printed on the rear panel of the cabinet. • Make sure that the cabinet is placed or installed in such a way that it cannot injure anyone. • Do not place heat sources on the speaker cabinet, such as lighting equipment or smoke machines. •...
Page 4
Only RIOTBOX8U/10U Only RIOTBOX8U/10U 16 15 DISREGARD To be operational you must insert two AA batteries in the wireless microphone (Screw off he lower part of the microphone housing) and the UHF antenna must be connected to connector 14.
REAR PANEL RIOTBOX 8 & 10: 1- MIC VOLUME: Controls the volume of microphone input 2. 2- XLR input: The XLR connects to a low impedance microphone. 3- LINE/ Bluetooth wireless technology Volume: Controls the volume of inputs 4, 5 and the ®...
Dimensions: 25 x 20 x 39 cm (9.8 x 7.9 x 15.3”) Colour: Black RIOTBOX 8U WITH 1 WIRELESS MICROPHONE Same specifications as RIOTBOX 8 with, as extras: One wireless cardioid dynamic microphone (neodymium magnet) with display showing microphone battery level indicator and UHF frequency and built-in receiver.
Page 8
TECHNICAL SPECIFICATIONS RIOTBOX10 WITHOUT WIRELESS MICROPHONE Woofer: 10”, 20 oz, 4 ohms Tweeter: Piezoelectric Frequency response: 40 Hz - 20 KHz Sensitivity: 94 dB +/- 2 dB Impedance: 4 ohms Sound pressure level: 94 dB Feature: Bluetooth wireless technology ® Battery: 12 volts, 4A, Li-ion, rechargeable Power supply: External charger 13.2 V DC Microphone input: XLR...
Need help?
Do you have a question about the RIOTBOX 8 and is the answer not in the manual?
Questions and answers