Advertisement
5. MAINTENANCE
5.1
Batteries
5.1.1
Remove the screw on the bottom of the borescope handle. (Fig.2).
Slide across and remove the battery compartment cap then
remove the AA battery holder.
5.1.2
Remove and replace AA batteries ensuring correct polarity.
5.1.3
Reinsert the holder and replace the battery compartment cap. Secure with
screw. (Fig.2).
5.2
Cleaning and Storage
5.2.1
Wipe the probe tip, shaft and housing with a clean, soft cloth to remove
residue and moisture.
5.2.2
Wash the probe tip and shaft with a cleaning liquid and rinse with water,
then dry.
5.2.3
Gently clean the probe lens with a lens cleaner (such as isopropyl alcohol)
and a cotton bud.
7
DO NOT submerge the borescope in water - the borescope monitor
is not water resistant.
NOTE: The borescope MUST be completely dry prior to returning it to the
storage case.
Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a recycle centre and disposed of in a manner which is compatible with
the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste
authority for recycling information.
• Refer to Section 5.1 for AA battery removal.
• LCD Lithium-ion battery - Remove the four screws on the back of the screen, separate the two half of the monitor. Unplug the battery
connector and lever the battery off the foam mountings.
Dispose of batteries according to local authority guidelines.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme.
Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to
www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Environmental Protection.
Battery Removal.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
Fig.4
01284 757500
01284 703534
www.sealey.co.uk
Web
sales@sealey.co.uk
email
VS8198
Issue: 1 - 28/04/11
Advertisement
