Sony BKM-21D Installation Manual page 46

Installing into Video Monitors
Note on using the BKM-20D/21D
When installing the input adaptor in an input option
slot on the rear of the monitor, or fitting a cover plate
to an unused slot, always do such operation in order
from the rightmost slot, as shown in Figure 1. If a
BKM-20D/21D is already installed, first of all remove
it and then do the installing operation in order from the
Figure 1
When one of the input option slots on the rear of the
monitor has a BKM-20D/21D (optional) installed, if
the slot to the right has another adaptor or the analog
input connectors board, or a cover plate fitted, as
shown in Figure 3, the radiation shield of the BKM-
Input option slots
Figure 3
22(E)
Input adaptor
Cover plate
Analog input connectors board
rightmost slot.
When removing a BKM-20D/21D, always loosen all
input adaptor screws and then remove in order from
the rightmost slot, as shown in Figure 2.
Figure 2
20D/21D may be damaged or detached (see Figure 4).
Using the BKM-20D/21D with the radiation shield
damaged or detached may result in electromagnetic
interference. Always use care about the radiation
shield.
Radiation shield
BKM-20D/21D
Input adator, etc.
Figure 4