1. Manuals
  2. Brands
  3. ProGlove Manuals
  4. Scanner
  5. MARK DISPLAY
  6. User manual

ProGlove MARK BASIC User Manual

Hide thumbs Also See for MARK BASIC:
Table of Contents

Advertisement

Quick Links

Download this manual
USER MANUAL
MARK BASIC
Technical
Document

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MARK BASIC and is the answer not in the manual?

Questions and answers

Related Manuals for ProGlove MARK BASIC

Summary of Contents for ProGlove MARK BASIC

  • Page 1 USER MANUAL MARK BASIC Technical Document...

  • Page 2: Table Of Contents

    3rd step: Switch on Scanner ................23 4th step: Connect Scanner ................. 24 5th step: Scan ..................... 29 6th step: Disconnect ProGlove System ............30 7th step: Release Scanner from Wearables ............. 34 CONFIGURING DEVICES AND FIRMWARE UPDATES 1st step: Open configurations ................36 2nd step: Create a new configuration ...............
  • Page 3 4th step: Device settings ................... 37 5th step: Symbology settings ................37 6th step: Workflow rules ..................37 7th step: Configure devices and Firmware Update .......... 38 SIGNAL TABLE General Scanning ....................40 Connection via BLE ..................... 41 Gateway ....................... 42 STORAGE AND CLEANING Storage ........................
  • Page 4 It is intended for process planners, integrators and mainte- ProGlove system is possible. nance technicians who are using ProGlove system for the first time. It is designed so that ProGlove system can be used In addition, other symbols are used that mean the safely without prior knowledge.

  • Page 5: Safety Instructions

    ProGlove system not functioning properly. ation, explosion, or fire. CAUTION WEARABLES Do not modify ProGlove system! This may otherwise lead to ProGlove system not functioning properly. CAUTION CAUTION Keep Wearables away from moving machine parts and do Do not stare directly into beam! Use of controls, adjustments not use without a scanner.
  • Page 6 • Do not short circuit a battery or allow metallic or conduc- The standard warranty period for all ProGlove devices tive objects to contact the battery terminals. is one year.

  • Page 7: Scope Of Delivery

    SCOPE OF DELIVERY CAUTION SCANNER | MARK Basic Do not use any damaged Hardware or Wearables! Check whether Hardware and Wearables are standard range mid range multi range  properly packaged and undamaged. CHARGING STATIONS Charging Station WEARABLES Index Trigger...

  • Page 8: Scanner

    SCANNER OVERVIEW After scanning a barcode, the scanner returns feedback signals: haptically by vibrations, acoustically by audio signals and optically by LEDs. Range: 10 - 90 cm | 4 - 35 in MARK Basic standard range Serial number Connection symbol...
  • Page 9 TECHNICAL DATA - MARK BASIC | standard range MECHANICAL PROPERTIES: BARCODE TYPES - 1D: Auto decodes all standard 1D Dimensions: 50 x 45 x 16 mm (1.47 x 1.77 x 0.63 in) codes including GS1 DataBar linear codes et al.

  • Page 10: Scanner

    SCANNER OVERVIEW After scanning a barcode, the scanner returns feedback signals: haptically by vibrations, acoustically by audio signals and optically by LEDs. Range: 30 - 150 cm | 12 - 59 in MARK Basic mid range Serial number Connection symbol...
  • Page 11 TECHNICAL DATA - MARK BASIC | mid range MECHANICAL PROPERTIES: BARCODE TYPES - 1D: Auto decodes all standard 1D Dimensions: 50 x 45 x 16 mm (1.47 x 1.77 x 0.63 in) codes including GS1 DataBar linear codes et al.

  • Page 12: Scanner

    SCANNER OVERVIEW After scanning a barcode, the scanner returns feedback signals: haptically by vibrations, acoustically by audio signals and optically by LEDs. Range: 10 - 250 cm | 4 - 98 in MARK Basic multi range Serial number Connection symbol...
  • Page 13 TECHNICAL DATA - MARK BASIC | multi range MECHANICAL PROPERTIES: BARCODE TYPES - 1D: Auto decodes all standard 1D Dimensions: 50 x 45 x 17 mm (1.47 x 1.77 x 0.67 in) codes including GS1 DataBar linear codes et al.

  • Page 14: Connectivity Device

    USB cable. In the USB HID mode, the Gateway simulates a computer keyboard. A serial connection is emulated in the USB CDC mode. In order to use the USB CDC mode, the device must be set to “USB CDC” in the ProGlove INSIGHT Configuration Tool (https://insight.proglove.com/) under “Connectivity Configuration -...
  • Page 15 ······································ https://insight.proglove.com/ Use for barcode, interface, device configuration et al. UTILITIES & ACCESSORIES: USB: ················································································· USB HID (keyboard input on host) USB CDC (virtual com port) ProGlove Deep Integration Protocol via USB NOTE Further technical specifications are available on docs.proglove.com...

  • Page 16: Charging Station

    (with M5 screws or cable ties). Charging slot Charging Attachment opening Pins for cable ties Attachment NOTE opening for USB-C Further technical specifications are M5 screws Product label available on docs.proglove.com...
  • Page 17 10-SLOT CHARGING STATION OVERVIEW TECHNICAL DATA The 10-Slot Charging Station provides multiple options to mount MECHANICAL PROPERTIES: to flat surfaces, workstations and racks. The charging status is Dimensions: 298 x 203 x 25 mm (3.74 x 2.06 x 0.94 in) ·············...

  • Page 18: Wearables

    WEARABLES HAND STRAP PROPERTIES GENERAL: The ProGlove Hand Strap offers an elastic, adjustable Velcro closure that ensures an optimal fit for any user's Packaging unit: ························· 10 pieces per package hand size and shape. It can be worn with or without Available sizes: ·························...
  • Page 19 WEARABLES INDEX TRIGGER PROPERTIES GENERAL: The ProGlove Index Trigger offers hand size optimized variants and can be wrapped around the hand in one movement. The thumb Packaging unit: ·························· 3 or 10 pieces per package hole fixes the wrap in the correct position and the flexible Velcro Available sizes: ··························...
  • Page 20 WEARABLES REEL PROPERTIES GENERAL: The ProGlove Reel can be attached with the black, rotating fastening clip to the desired spot. This can be, for example, on the user's Packaging unit: ······· 2 reels per package clothing or on a belt. Alternatively, the Reel can also be worn on a SAFETY &...
  • Page 21 APPLICATION OF PROGLOVE SYSTEM...

  • Page 22: 1St Step: Charge Scanner

    1ST STEP: STEP: CHARGE SCANNER CONNECT THE CONNECTIVITY DEVICE CAUTION CAUTION Only touch the connectivity device with dry hands! Only use scanner in a dry Charging Station and only This may otherwise lead to the connectivity device touch with dry hands! This may otherwise lead to not functioning properly.

  • Page 23: 3Rd Step: Switch On Scanner

    1 lights up green. The connectivity device is connected to the end device. 3. In the configuration tool 3. Press the textile trigger on (https://insight.proglove.com/) the glove for about 2 seconds under “Connectivity Configuration > Integration Path” select USB CDC.

  • Page 24: 4Th Step: Connect Scanner

    CONNECT VIA CONNECTIVITY DEVICE CONNECT VIA PROGLOVE INSIGHT MOBILE:  For using a ProGlove scanner with ProGlove 1. Press the trigger on the INSIGHT Mobile via software keyboard, wearable in order to activate Intent or SDK find more information under the scanner.
  • Page 25 The range between the scanner and the end device is  RESULT <33 ft (10m) Example serial number: MARK Basic - 00000. To make the scanner visible for the end device, the scanner must be put into pairing mode: TIP 1...
  • Page 26 CONNECT WITH APPLE iOS 11 OR HIGHER: RESULT MARK Basic - 00000 "MARK Basic" would like to pair with your iPhone. MARK Basic - 00000 Under “Settings - Bluetooth,” Select “MARK Basic - 00000”. Confirm the “Bluetooth Pairing The scanner will flash blue twice activate the Bluetooth option.
  • Page 27 MARK Basic - 00000 MARK Basic - 00000 - 00000 Under “Settings - Connected Tap “Bluetooth” and select Select ‘MARK Basic - 00000’. The scanner will flash blue twice devices,” switch on the “Pair new device.” and you will hear two beeps.
  • Page 28 CONNECT WITH MICROSOFT WINDOWS 10: MARK Basic - 00000 MARK Basic - 00000 Under “Bluetooth & other Select the option “Bluetooth: Select “MARK Basic - 00000”. Click “Done”. devices,” click on “Add Mouses, keyboards and other Bluetooth and other devices”.

  • Page 29: 5Th Step: Scan

    1. Press the trigger on the glove in order to activate the scanner. MARK Basic - 00000 2. Aim scanner at the barcode and scan. E X AMPLE BARCODE The scanner will flash blue twice RESULT and you will hear two beeps.

  • Page 30: 6Th Step: Disconnect Proglove System

    STEP: DISCONNECT SCANNER DISCONNECT SCANNER FROM THE DISCONNECT THE CONNECTION CONNECTIVITY DEVICE CABLE FROM THE GATEWAY: Use the scanner to  Unplug  scan the pairing code connection cable of a different Gateway. from the Micro USB port. RESULT Scanner is disconnected from the Gateway and RESULT is connected to a new Gateway.
  • Page 31 Only disconnect scanner if this is to be newly DISCONNECT FROM APPLE IOS: connected to another end device. RESULT MARK Basic - 00000 Under: “Settings - Bluetooth,” Tap on “Forget this device.” Confirm “Forget Device.” The scanner will flash red three on the symbol.
  • Page 32 In the Bluetooth option under Select “Forget.” The scanner will flash red three “Paired devices,” tap on the gear times and you will hear three wheel symbol of “MARK Basic - beeps. Scanner will no longer 00000.” be shown as connected under “Paired devices.”...
  • Page 33 DISCONNECTING FROM MICROSOFT WINDOWS: RESULT MARK Basic - 00000 MARK Basic - 00000 Under “Bluetooth & other Click “Remove device.” The scanner will flash red three devices”, select “MARK Basic times and you will hear three - 00000.” beeps. Scanner will no longer be shown as connected under “Bluetooth &...

  • Page 34: 7Th Step: Release Scanner From Wearables

    STEP: RELEASE SCANNER FROM WEARABLES CAUTION Do not rub over the pins of the wearable with the scanner! This may otherwise lead to bent pins.  More information about removing scanner from wearable can be found in our documentation. 1. Use your fingers to press between the scanner and the fastening rail of the wearable.

  • Page 35: Configuring Devices And Firmware Updates

    The configuration tool under https://insight.proglove.com/ can be used to individually set the ProGlove System to improve scanning processes and to update the firmware. To update the firmware proceed with step 7.  To create a new configuration proceed with step 1.

  • Page 36: 1St Step: Open Configurations

    STEP: OPEN CONFIGURATIONS STEP: CREATE A NEW CONFIGURATION 1. Go to Configurations in the INSIGHT navigation. Choose which connectivtiy option is used and  need to be configurated. STEP: CONNECTIVITY CONFIGURATION 2. Select a saved configuration or create a new one. It is possible to configure the connectivity settings according to the end device.

  • Page 37: 4Th Step: Device Settings

    IF a condition is true, THEN an action is executed. An action is also carried out without a condition. APPLICATION EXAMPLE: Insert the prefix “Pro” for the following barcode: Condition: Barcode matches “Glove” Action: Add Prefix “Pro” Outcome: “ProGlove”...

  • Page 38: 7Th Step: Configure Devices And Firmware Update

    For a firmware update: Download the latest firmware version at https://  insight.proglove.com/devices/downloads or get it from your ProGlove contact person. Follow the next steps. To configure PG INSIGHT Mobile: 2. set action (then) Copy the downloaded configuration file in the ...
  • Page 39 TO CONFIGURE THE GATEWAY / FIRMWARE UPDATE: 1. Connect the Gateway with the computer. The Gateway boots 5. Scan this barcode to disable the Gateway as up. This takes about 2 min and is a mass storage device on the computer. finished when the USB LED shows constant green light.

  • Page 40: Signal Table

    SIGNAL TABLE GENERAL SCANNER: Description Connection symbol Battery symbol Audio signal Vibration Barcode data could be Short green Short positive Short transferred flashing beep vibration Barcode data could not Red flashing 3 Long negative Long be transferred times briefly beep vibration Battery charge under 10% Slow red flashing...

  • Page 41: Connection Via Ble

    SCANNER CONNECTION VIA BLE: Description Connection symbol Battery symbol Audio signal Vibration Scanner searches for an end device Pulsing Blue Pulsing Blue Continuously rising beep Scanner is connected to an end device Blue flashing 2 Blue flashing 2 Short rising Short times briefly times briefly...

  • Page 42: Gateway

    GATEWAY Description LED 1 (USB - LED) LED 2 (SCANNER - LED) LED 3 (Cloud - LED) Gateway boots up Left to right run through all LEDs alternating Blue / Green until start *the boot up takes around 2 min. Gateway is connected to the Constantly green end device via USB...
  • Page 43 Description LED 1 (USB LED) LED 2 (Scanner - LED) LED 3 (Cloud - LED) Firmware Update: Constantly yellow Constantly yellow Constantly yellow Gateway is in download mode Firmware Update: Constantly purple Constantly purple Constantly purple Scanner is flashing / Gateway deploys Firmware Update: left to right run trough all LEDs alternating purple until done Gateway is flashing...

  • Page 44: Storage And Cleaning

    CAUTION: Store hardware wearables in a dry and dirt-free Protect wearables from moisture! This may otherwise environment. In case of transport, ProGlove System lead to the wearables not functioning properly. must be transported shockproof in its original Do not wash wearables.

  • Page 45: Solution To The Problem

    SOLUTION TO THE PROBLEM SCANNER PROBLEM CAUSE SOLUTION Scanner is not responding. Battery is not charged. Charge scanner in the Charging Station for at  least 20 min. Wearable is defective. Change wearable.  Scanner is not vibrating or does not Feedback signals are disabled.
  • Page 46 SCANNER PROBLEM CAUSE SOLUTION Scanner illumination on but no The barcode label cannot be read. Create new barcode label.  barcodes are scanned. The barcode type cannot be read. Check whether the barcode type in the  configuration tool is enabled under “Symbology settings”.

  • Page 47: Ble - Data Transfer

    BLE - DATA TRANSFER PROBLEM CAUSE SOLUTION Barcode data is not transferred. Scanner is not connected to the 1. Scan the pairing barcode. end device. 2. Lights up blue twice briefly while scanner is connecting and after a successful connection. Scanner lights up green after the Scanneris out of range of the Bring scanner closer to the end device and...

  • Page 48: Gateway - Data Transfer

    (Maximum range is 100 - 130 ft. (30 - 40m)) Gateway is defective. Gateway must be replaced. More detailed information can be found at  docs.proglove.com/en/gateway. Scanner is defective. Scanner must be replaced. More detailed information can be found at  docs.proglove.com.

  • Page 49: Charging Station

     to power source. Scanner is defective. Scanner must be replaced. More detailed information can be found at  docs.proglove.com Charging Station is defective. The Charging Station must be replaced. More detailed information can be found at  docs.proglove.com/en/charging-stations. TIP 1...

  • Page 50: Disposal

    ProGlove system: Charging Stations 1. Release Scanner from Wearables Workaround GmbH, hereby declares that the ProGlove Charging Stations 2. Disconnect the connection cable from (Charging Station S, 10-Slot Charging Station) are in compliance with the Access Point / Gateway the following directives: 3.
  • Page 51 ProGlove has taken reasonable measures to provide information BRAZIL RADIO EQUIPMENT WARNING in this manual that is complete and accurate, however, ProGlove Este equipamento não tem direito à proteção contra interferência reserves the right to change any specification or the user manual prejudici-al e não pode causar interferência em sistemas...
  • Page 52 FCC/IC CERTIFICATION COMPLIANCE: ProGlove System The ProGlove System, comprised of: MARK 3, MARK 2 MR, MARK 2 SR, MARK Basic, MARK Basic, MARK Display, LEO, Charging Station S, 10 Slot Charging Station Gateway, Wearables, peripherals and accessories, complies with the following FCC/IC product categories: •...
  • Page 53 FCC Specific Certification Compliance Under the regulations of the FCC the user has to be aware of the following when using the ProGlove MARK Basic: 1. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  • Page 54 IC Specific Certification Compliance Under the regulations of the IC the user has to be aware of the following when using the ProGlove MARK Basic: 1. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference;...

  • Page 55: Support

    SUPPORT TECHNICAL SUPPORT CONTACT DATA If you have questions about integrating or using the ProGlove devices, our customer support department will be happy to help you. They will process your request as soon as possible. You can reach them at: SUPPORT WEBSITE: docs.proglove.com...
  • Page 56 Workaround GmbH Building 64.08a Rupert-Mayer-Str. 44 81379 München Germany ProGlove Inc. 1229 N North Branch St., Suite 211 Chicago, IL 60642 ProGlove Ltd. Coventry University Technology Park Puma Way, Coventry CV1 2TT, UK United Kingdom Support at: docs.proglove.com support@proglove.com...

Table of Contents