Zanussi ZEM6732FBA User Manual page 9

zones do not operate. The heat setting display
shows .
To activate the function: touch
or of the timer to set the time. When the
time comes to an end, the sound operates and
00 flashes.
To stop the sound: touch
The function has no effect on the
operation of the cooking zones.
STOP+GO
This function sets all cooking zones that operate
to the lowest heat setting.
When the function operates, you cannot change
the heat setting.
The function does not stop the timer functions.
To activate the function: touch
comes on.
To deactivate the function: touch
previous heat setting comes on.
Lock
You can lock the control panel while cooking
zones operate. It prevents an accidental change
of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays on.
To deactivate the function: touch
previous heat setting comes on.
When you deactivate the hob, you
also deactivate this function.
The Child Safety Device
This function prevents an accidental operation
of the hob.
To activate the function: activate the hob
with . Do not set the heat setting. Touch
for 4 seconds. comes on. Deactivate the
hob with .
www.zanussi.com
. Touch
.
.
. The
.
. The
To deactivate the function: activate the hob
with . Do not set the heat setting. Touch
for 4 seconds. comes on. Deactivate the
hob with .
To override the function for only one
cooking time: activate the hob with
comes on. Touch
heat setting in 10 seconds. You can operate
the hob. When you deactivate the hob with
the function operates again.
Power management function
• Cooking zones are grouped according to the
location and number of the phases in the
hob. See the illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power between
cooking zones connected to the same
phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds 3700
W.
• The function decreases the power to the
other cooking zones connected to the same
phase.
• The heat setting display of the reduced
zones changes between two levels.
.
for 4 seconds. Set the
9