Servicing Fixtures And Tools; Preparation For Servicing - Sharp DV-RW260S Service Manual

(For 2 head 1 speed model,
4 head model)
VHS Alignment Tape
3
JG001E (VP S-LI6 )
1
3
JG001F (VP S-CO1 )
1
3
JG001R (VP S-LI6 H)
1
3
(VP S-X6 )
JG001U
1
JG153 X Value Adjustment
Screwdriver
Ref. No. Part No.
JG001E VROCPSV
JG001F VROCPSV
JG001R VROCBFFS
JG001U 9JDAPJG001U00
JG001C VROUBZFS
JG001D VROCPSV
JG001V 9JDAPJG001V00
JG002B JIGTH0006
JG002E JIGTG0090
JG002F JIGTG1200
JG005 9JDAPJG005000
JG153 9JDAPJG153000
JG022 9JDAPJG022000
JG024A 9JDAPJG024A00
JG100A JIGVHT-063
1. While pressing the CH DOWN button on the set for more than 2 seconds, press the POWER button on the set
simultaneously at the Power OFF. Although the DVD is connected, the DVD mode cannot be selected.
2. Press both CH UP button on the set and the REC button on the set for more than 2 seconds.
(The BOT, EOT, and the Reel Sensor do not work and the VCR deck can be operated without a cassette tape.)
3. In case of using a cassette tape, press the EJECT button to insert or eject a cassette tape.
Turn on the power and re-check the cable before checking the trouble points.
When you servicing with connection of DVD, perform the operations above step 2 to step 3.

SERVICING FIXTURES AND TOOLS

(For 2 head 2 speed model)
VHS Alignment Tape
3
JG001C (VP S-LI6 )
2
3
JG001D (VP S-CO1 )
2
3
JG001V (VP S-X6 )
2
JG022 Master Plane
Parts Name
VHS Alignment Tape
VHS Alignment Tape
VHS Alignment Tape
VHS Alignment Tape
VHS Alignment Tape
VHS Alignment Tape
VHS Alignment Tape
Adapter
Dial Torque Gauge (10~90gf•cm)
Dial Torque Gauge (60~1200gf•cm)
Post Adjustment Screwdriver
X Value Adjustment Screwdriver
Master Plane
Reel Disk Height Adjustment Jig
Torque Tape (VHT-063)

PREPARATION FOR SERVICING

JG002B Adapter
JG002E Dial Torque Gauge
(10~90gf•cm)
JG002F (60~1200gf•cm)
JG024A Reel Disk Height
Adjustment Jig
Monoscope, 6KHz (For 2 head 1 speed model, 4 head model)
Color Bar, 1KHz (For 2 head 1 speed model, 4 head model)
Hi-Fi Audio (For Hi-Fi model)
X Value Adjustment (For 2 head 1 speed model, 4 head model)
Monoscope, 6KHz (For 2 head 2 speed model)
Color Bar, 1KHz (For 2 head 2 speed model)
X Value Adjustment (For 2 head 2 speed model)
VSR Torque, Brake Torque (S Reel/T Reel Ass'y)
Brake Torque (T Reel Ass'y)
VSR Torque, Brake Torque (S Reel)
Guide Roller Adjustment
X Value Adjustment
Reel Disk Height Adjustment
Reel Disk Height Adjustment
Playback Torque, Back Tension Torque During Playback
D1-1
JG005 Post Adjustment
Screwdriver
Part No. SV-TG0-030-000
(small)
JG100A Torque Tape
(VHT-063)
Remarks