Replacement Parts - Omnifilter US2000 Installation Instructions Manual

TROuBLESHOOTING Continued
Leaks from tubing fittings
1.
Relieve pressure. Turn off the water supply to the system and
open faucet until water flow stops. Place a bucket or towel
under the system to catch any water drips.
2.
Depress collet on system or inlet supply adapter tubing
fittings and pull tubing from fitting. Inspect surface of tubing
for scratches or debris. Clean or cut back tubing to access
clean surface.
3. Wet the end of the inlet tubing and press into the inlet
fitting of the system. Ensure the tubing is fully pushed past
the fitting o-rings. Place system into operation and check
for leaks. If leaks persist, turn off the water supply and
contact OMNIFILTER Customer Service at 800.937.6664
M–F 7:30 AM–5 PM CST.

REPLACEMENT PARTS

Part Number Description
1 455911-127 1750R Filter Cartridge
2 455910-127 1500R Filter Cartridge
3 SH357268 Filter Head Assembly (with
battery)
4 SH244748 US2000 Kit
5 SH243210 Wall Mount Bracket
6 SH243217 Mounting Screws
7 SH244771 Faucet Assembly
8 SH244807 Faucet Base (Life Indicator)
9 SH143431 Inlet Supply Adapter
10 SH144072-03 1/4-inch Tubing
11 SH244606 Teflon
SH147913 Manual
For replacement parts contact your local OMNIFILTER retailer or
call OMNIFILTER Customer Service at 800.937.6664.
QTY
1
and
1
1
1
1
2
1
1
1
6 ft
Tape 30"
®
1
1
2
3
4
7
9
10
11
5
6
8
• 7 •