Polaris Phoenix 200 Owner's Manual page 88

ADJUSTMENTS
SPEED CONTROL SYSTEM
This vehicle is delivered in a limited mode to have a maximum speed at or below
20 MPH (32 km/h). The vehicle contains a means for limiting the maximum
speed to 20 MPH (32 km/h) and 30 MPH (48 km/h) or less. The maximum
unrestricted speed capability is 38 MPH (61 km/h) or less.
The dealer CANNOT, under any circumstances, either prior to the sale or later,
even at the consumer's request, remove or adjust any speed limiting devices.
Your POLARIS ATV has an adjustable throttle limiting screw. Speed limiting
devices may be adjusted/removed only by consumers when they determine that
their child is capable of handling the additional speed.
THROTTLE STOP SPEED CONTROL SYSTEM
The speed control system has two options for limiting speed. Adjusting the
speed limit screw allows you to control vehicle speed between 0 and 30 MPH
(48 km/h). This adjustment controls how far the throttle opens. To remove the
speed limiting entirely and allow operation up to the maximum vehicle speed of
38 MPH (61 km/h), the speed limit bracket can be removed.
1. To adjust the speed limit screw
2. Turn the screw inward to reduce the speed. Turn the screw outward to
increase speed up to the 30 MPH (48 km/h) maximum. The throttle lever will
stop against the speed control bracket at the maximum setting.
3. Tighten the jam nut after adjusting.
4. To allow the vehicle to operate to the maximum of 38 MPH (61 km/h),
remove the bracket fastener
bracket.
Adjusted Below Maximum
86
q
, loosen the jam nut
e
on the throttle assembly and remove the
Bottom Views of Throttle Assembly
w
.