Voltage Selection; Ac Power Supply Cord And Ac Plug Adaptor; Specifications - Sharp SD-NX10W Service Manual

Before operating the unit on mains, check the preset voltage. If the voltage is different from your local voltage, adjust the voltage
as follows.
Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110 V, 127 V, 220 V or 230-240 V AC).

AC POWER SUPPLY CORD AND AC PLUG ADAPTOR

QACCA0004AW00
QACCB0008AW00
QACCE0007AW00
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
SD-NX10W
General
Power source AC 110/127/220/230-240 V, 50/60 Hz
Power consumption 54 W
Dimensions MD/CD/tuner unit
Width: 318 mm (12-9/16")
Height: 210 mm (8-5/16")
Depth: 93 mm (3-11/16")
Amplifier unit
Width: 160 mm (6-5/16")
Height: 210 mm (8-5/16")
Depth: 136 mm (5-3/8")
Weight MD/CD/tuner unit
3.7 kg (8.2 lbs.)
Amplifier unit
3.8 kg (8.4 lbs.)
Input/output terminals MD/CD/tuner unit
Auxiliary input: 500 mV/47 kohms
Digital input (optical)
System output (RCA)
Line output: 500 mV/47 kohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
System control (SD-NX10W amplifier unit only)
Amplifier unit
System input (RCA)
Speakers; 6 ohms
System control (SD-NX10W MD/CD/tuner unit only)
Amplifier
Amplification system 64fs 1-bit switching
(Remarks:fs = 44.1 kHz)
Rated output power RMS: 50 W (25 W + 25 W) (10% T.H.D.)
A/D noise shaping 7th-order
CD player
Type 1-disc slot-in type compact disc player
Signal readout Non-contact, 3-beam semiconductor laser pickup
D/A converter 1-bit D/A converter
Frequency response 20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)

VOLTAGE SELECTION

SPECIFICATIONS

(delta - sigma) modulation
QACCJ0006AW00
QACCL0002AW00
QPLGA0004AWZZ
MiniDisc
Type
Signal readout
Rotation speed
Error correction
Quantization
Coding
Sampling frequency
Recording method
Frequency response
D/A converter
Wow and flutter
Signal/noise ratio
Dynamic range
Audio channel
Tuner
Frequency range
CP-NX10W
Type
Maximum input power
Rated input power
Impedance
Dimensions
Weight
Specifications for this model are subject to change without
prior notice.
– 3 –
SD-NX10W
MiniDisc Recorder
Non-contact, 3-beam semiconductor laser pickup
400 - 900 rpm CLV, Approx.
ACIRC (Advanced Cross Interleave Reed-Solomon Code)
20-bit linear (A/D converter)
ATRAC (Adaptive TRansform Acoustic Coding), ATRAC3
44.1 kHz
Magnetic modulation overwrite method
20 - 20,000 Hz
1-bit D/A converter
Unmeasurable (less than 0.001% W. peak)
95 dB (1 kHz)
90 dB (1 kHz)
Stereo: 2 channels (SP, LP2, LP4)
Monaural: 1 channel (MONO)
FM: 88 - 108 MHz
AM: 531 - 1,602 kHz
2-way type speaker system
3 cm (1-3/16") Tweeter
10 cm (4") Woofer
50 W
25 W
6 ohms
Width: 187 mm (7-3/8")
Height: 423 mm (16-11/16")
Depth: 200 mm (7-7/8")
3.7 kg (8.2 lbs.)/each