ATP Instrumentation MT-913 User Manual

Operation Instructions
Power on/off: Press" " to power the meter on/off.
Data Hold: Whilst in measurement mode, press "
display "HOLD" which indicates the data is frozen, to release the held
reading. Press the "
MAX/MIN: Whilst in measurement mode, press"
or minimum recorded measurements. The LCD display will clearly display
"MAX", or "MIN" to indicate the displayed value. Press and hold "
exit MIN/MAX mode and return to normal measurement mode.
Unit:
Whilst the meter is turned on，press"
point temperature and wet bulb temperature in turn.
°C / °F Mode: Whilst the meter is turned off, press and hold "
unit will power on with the temperature unit (°C/°F) toggled.
Auto Power Off Whilst the meter is turned off, press and hold "
unit will turn on with the auto power off feature toggled off.
Note: If the icon is displayed, the auto power off feature is enabled.
Additional Notes
1)
Recommended recalibration cycle: 1 year.
2)
Remove the battery when the meter is to be stored for long periods of time to avoid
battery leakage.
3)
When the battery is low，the low battery indicator will appear.
A new battery is needed.
complies with EMC
This unit
", the LCD display will clearly
" button again the release the reading.
"，to cycle through the maximum
"，it can select temperature, dew
" and press "
" and press "
4
" to
WWW.ATP-INSTRUMENTATION.CO.UK
Sales: 01530 566800
". The
UNIT 22 Tournament Way, Ashby-De-La-Zouch, Leicestershire, LE65 2UU
". The
MINI COLOUR LCD HUMIDITY & TEMPERATURE METER
Important Safety Notice
Read the following safety information carefully before attempting to operate or service the
meter. Use the meter only as specified in this manual; otherwise, the protection provided by
the meter may be impaired.
Environmental Operating Conditions
Humidity:
Operating temperature:
Maintenance
Repairs or servicing not covered in this manual should only be performed by qualified
personnel.
Wipe the unit with a dry soft cloth. Do not use abrasives or solvents on this instrument.
ATP INSTRUMENTATION LTD
THE ONE STOP INSTRUMENT SHOP
Technical: 01530 566804
MT-913
USER MANUAL
≤ 90% RH (Non-condensation)
-20 to 60°C / -4 to140°F
1