Replacement Parts - Quadivator PB60 06 Assembly/Operators/Parts Manual

4. REPLACEMENT PARTS

The following pages contain parts
illustrations and replacement part numbers
for all components for the Quadivator Power
Brush. At the time of printing, some of the
minor parts in the manual may become
outdated.
To obtain replacement parts, please contact
your Quadivator Dealer for service. To
locate the nearest dealer, please contact a
Quadivator Representative using the contact
information at the beginning of the manual.
Power Brush Sub-assemblies
ITEM
1
2
3
4
5
6
Quad Power Brush
Electrical Brush Pivot Option
(89900):
QTY. PART DESCRIPTION
1 89906 Bracket - Actuator Base
1 86031 Actuator
3 FW.5N Flat Washer 1/2 SAE
1 89915 Weld't -Actuator Rod End
1 CTP.125x1 Cotter Pin 1/8 x 1
1 89930 Actuator Switch/Wiring Harness (not shown)
Operators Manual – Version 06
When ordering parts – please have the
following information on hand:
- Part Number you are looking for.
- Model Number and Serial Number
of the machine.
- Quantity required.
To ensure warranty support for your
Quadivator, please fill out the Warranty
Registration Card located at back of the
Operator's Manual.
5