Table of Contents
Advertisement
7
Rear panel
Last updated: June 28, 2022 03:24. Revision #4967
1. AC Power Socket.
2. Signal Output Sockets - RCA connections used to connect to a line-level input.
Note: Do not connect to a phono-level input.
3. Balance Control - Used to make fine adjustments to the relative output levels of the left and right channels. In the central position the output from
each channel is equal.
4. MM Input Sockets - RCA connections used to connect to a turntable fitted with a moving-magnet cartridge.
5. Ground Connection Screw - If your turntable has a separate grounding lead then connect here. This provides shielding to the tonearm and the
sensitive circuitry in the turntable.
Advertisement
Table of Contents
