Page 1
CHARGER OPERATOR’S MANUAL 56 VOLT TURBO CHARGER MODEL NUMBER CH7000E WARNING: To reduce the risk of injury, the user must read and understand the Operator’s Manual before using this product. Save these instructions for future reference. MNL_EGO_CH7000E_AV01.01_220419...
Page 2
3. LED Indicators 4. Electrical Contacts 2. Cooling Air Port 1. Battery Mounting Slot 5. Handle 6. Wall Mounting Hole Green LED Green LED Red and Green biocolor LED...
Do not allow gasoline, oils, petroleum-based products, etc. to come in contact with plastic parts. These materials contain chemicals that can damage, weaken, or destroy plastic. ◾ Do not operate the charger with a damaged 56 VOLT TURBO CHARGER — CH7000E...
4. When charging a battery pack, the 5 LED Indicators on the charger will shine green clockwise, indicating charge level (Fig. D). For BA1400, BA2800 and BA4200 battery packs, the power indicator on the 56 VOLT TURBO CHARGER — CH7000E...
WARNING: If the supply cord is damaged, it must WALL MOUNTING HOLES be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 56 VOLT TURBO CHARGER — CH7000E...
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. 56 VOLT TURBO CHARGER — CH7000E...
Cool down the battery pack or warm it up. Charging will begin The battery pack is too not work and LED 3 when the temperature of the battery pack returns to hot or too cold. shines red. 3°C - 57°C. 56 VOLT TURBO CHARGER — CH7000E...
Need help?
Do you have a question about the CH7000E and is the answer not in the manual?
Questions and answers