Operating Instructions; The Use Of Remote Control - AOC TCL LCD27VN Service Manual

27'' LCD TV Color Monitor
2. Operations Instructions

2.1 The Use Of Remote Control

POWER:
Press to turn on/off the TV. The TV
is never completely powered off
unless it is physically unplugged.
0~9/100 Digit buttons
To select a TV channel.
CH
Press ▲ or▼ to brows
through the TV channels
which are not erased. To
view a blocked channel,
use the digit buttons to
access the channel and
enter your access code.
VOL
Press + or – to
adjust the volume.
SIZE
Display the graphic
in 16:9 or 4:3 mode
SLEEP
With this key you can set a
time period after which the
TV should switch itself to
standby. Press the key
repeatedly to select the
number of minutes. The
counter runs from 0, 30, 60,
120 minutes. The timer
begins to count down from
the number of minutes
selected after the display has
disappeared.
PIP
ON/OFF
Used to switch the PIP
function ON or OFF
PIP/POP
Press this button to
display PC input and
other input on the
screen at the same time
MENU, ▲, ▼, ◄, ►
These buttons are used to
display or adjust the various
functionalities.When the PIP
is ON but no menus are
available, use these ▲, ▼,
◄, ► to change the position
of the PIP.
.
V-CHIP
Use this button to define
the movies that this TV set
can receive
SWAP
Press to swap the two
screens when PIP or
POP is work
4
TCL LCD27VN
MUTE
Temporarily interrupt
the sound or restore it.
DISPLAY
Press this button to
Display Channel
number on the right-top
corner.
MTS
Press this key to
activate Multichannel
Television Sound,
Stereo or Mono sound.
PRE-CH
To display the previously
selected TV channel.
TV/VIDEO
Select your input source: press
TV/VIDEO and ▲, ▼, ◄, ► to
select TV,S-VIDEO, AV1, AV2,
COMPONENT,VGA(PC) or
HDTV mode, according to
where you connected your
external source.
 AV1/AV2 for a VCR connected
to the AV connectors of the
TV.
 S-VIDEO for a S-Video VCR
connected to the S-VIDEO
connector of the TV.
 COMPONENT and HDTV
input via Y,Cb,Cr / Y,Pb,Pr on
the DVD Player or set top
box.
VGA For PC mode
CAPTION
Press this button to turn
Closed Caption on.
PIP
TV/VIDEO
Select the signal source: If you
are in main picture or HDTV
mode, you can select audio1,
audio2, S-video, color contrast
or TV signal. Otherwise, you
can only select computer
graphics or HDTV.