Advertisement
Quick Links
Installation Instructions for
Pork King Series
Congratulations, you have just purchased the finest watering
fountain on the market. This unit is built to give you excellent
service when properly installed and maintained. Please follow
instructions carefully. Read and understand all instructions
before installing
Part # 17836
18 October, 2012
Purchase parts and waterers at
PeteCoSupply.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Ritchie Pork King Series
Summary of Contents for Ritchie Pork King Series
- Page 1 Installation Instructions for Pork King Series Congratulations, you have just purchased the finest watering fountain on the market. This unit is built to give you excellent service when properly installed and maintained. Please follow instructions carefully. Read and understand all instructions...
- Page 2 For optimum water line protection, use Part # Description the 12” diameter insulated Ritchie Thermal Tube, part numbers and sizes are shown 18158 1’ Top Section to the left. Tube opening must be kept clear. NOTE: The supply line touching the 16417 2’...
- Page 3 1/2” stainless steel expansion anchor bolts (not included) is recommended for concrete installations. Anchor bolts are available from Ritchie in a two pack, part # 14261. Use an all-weather sealant under the outside edge when anchoring to concrete to keep air from leaking under fountain.
- Page 4 12575 Moderate, 40-60 psi. standard valve supplied with your fountain, see your Green 13597 1.45 High, 60-80 psi. Ritchie Dealer if this is needed. Pork King Series Instruction Manual 18 October, 2012...
- Page 5 Defective part(s) will be repaired 10 year limited against manufacturing defect. 100% first five years, or replaced at the option of Ritchie Industries. then declining 20% per year for the remaining five years. This warranty specifically excludes all labor and shipping charges.
- Page 6 16664 200W Element (240 Volt) 4 Pkg. 15155 Screw – Hinge Rod (10/Pkg.) 1 Pkg. 16424 48W Cable Heater (240 Volt) 1 Pkg. NS = Not Shown Italicized text = Not included or optional configuration add-ons Pork King Series Instruction Manual 18 October, 2012...
- Page 7 1 Pkg. For 240 Volt Pork King 2-1 Part #16846, See Parts Below 18628 Drain Plug (2/Pkg.) 1 Pkg. 16664 200W Element (240 Volt) 2 Pkg. 16326 Hinge Rod Only PK 2-1 16424 48W Cable Heater (240 Volt) 1 Pkg. Pork King Series Instruction Manual 18 October, 2012...
- Page 8 16664 200W Element (240 Volt) 2 Pkg. 15155 Screw – Hinge Rod (10/Pkg.) 1 Pkg. 16424 48W Cable Heater (240 Volt) 1 Pkg. NS= Not Shown Italicized text = Not included or optional configuration add-ons Pork King Series Instruction Manual 18 October, 2012...
- Page 9 16093 Hinge Rod Only – PK1 16424 48W Cable Heater (240 Volt) 1 Pkg. 15155 Screw – Hinge Rod (10/Pkg.) 1 Pkg. NS = Not Shown Italicized text = Not included or optional configuration add-ons Pork King Series Instruction Manual 18 October, 2012...
-
Page 10: Troubleshooting
A severe pressure drop indicates a restriction or undersized supply system. Check that shutoff valves are fully open Pork King Series Instruction Manual 18 October, 2012...
Need help?
Do you have a question about the Pork King Series and is the answer not in the manual?
Questions and answers