Advertisement
Preparation before disassemble
disassemble
1.Clean the room for
2.Identify the area for monitor
3.Check the position that the monitors be placed and the quantity of the monitor ;prepare the area for material flow;
according to the actual condition plan the
4.Prepare the implement, equipment, materials as bellow:
1) working table
2) Screw-driver
3) knife
4) glove
5) cleaning cloth
6) ESD protection
After unplugging the power cord, the power board still have power energe. Please pay attention
when disassembling/assembling Power BD.
S1
Disassemble the
RC
, stand
(Rear Case)
and base
S2
Disassemble
SHD
(Shielding)
PICTURE 1
4. Disassembly and Assembly SOP
4.1 Disassembly Procedures
disassemble
Disassemble Stand and Base from the RC(Rear Case). Unlock RC screws.
Disassemble RC from monitor.
Tear down AL-Tape off SHDas picture 1.
Unlock the Hexagonal screws and the DP screw as picture 2.
B246HL
layout
ACER B246HL
PICTURE 2
8
Advertisement
