Fluke VT06 User Manual page 14

VT06/VT08
Users Manual
Menu Option
CenterPoint
TempUnit
ROIMeasure
Alarm
Reflmeasure
Distance
AutoShut
ScreenBright
Laser
10
Table 6. Main Menu Options (cont.)
Use the center point marker to help you with temperature
measurement. The Meter screen shows the center point
temperature. When you use the center point marker to aim
at the target, you can get the target temperature. Options
are:
On

Off

After you power on the setting and return to Camera
mode, you see a marker in the center of screen.
Set the temperature unit to use:
Celsius

Fahrenheit

The option to set a TempUnit is not available in all
countries.
Set the measure area to help with temperature
measurement. See ROIMeasure.
Set the alarm parameters. See Alarm.
Set the reflected temperature.
The farther the distance, the weaker the infrared energy.
You can set the distance between the Meter and the
target to make the temperature measurement more
accurate.
You can set an automatic shutdown to save battery
power. The Meter automatically shuts down after the set
time has passed without operation.
You adjust screen brightness to adapt to the ambient
light.
Turn on or turn off the laser setting switch. For information
about using the laser, see
Function
Laser Pointer.