High Beam Assist Operation; High Beam Assist Malfunction And Limitations - Hyundai Santa Fe 2022 Owner's Manual

Convenience Features

High Beam Assist Operation

Display and control
• After selecting 'High Beam Assist'
in the Settings menu, High Beam
Assist will operate by following the
procedure below.
- Place the headlamp switch in
the AUTO position and push
the headlamp lever towards the
instrument cluster. The High Beam
Assist ( ) indicator light will
illuminate on the cluster and the
system will be enabled.
- When the system is enabled, high
beam will turn on when vehicle
speed is above 25 mph (40 km/h).
When vehicle speed is below 15
mph (25 km/h), high beam will not
turn on.
- The High Beam (
will illuminate on the cluster when
high beam is on.
• When High Beam Assist is operating, if
the headlamp lever or switch is used,
the system operates as follow:
- If the headlamp lever is pulled
towards you when the high beam
is off, the high beam will turn on
without High Beam Assist canceled.
When you let go of the headlamp
lever, the lever will move to the
middle and the high beam will turn
off.
- If the headlamp lever is pulled
towards you when the high beam is
on by High Beam Assist, low beam
will be on and the system will turn
off.
- If the headlamp switch is placed
from AUTO to another position
(headlamp/position/off), High
Beam Assist will turn off and the
corresponding lamp will turn on.
5-90
• When High Beam Assist is operating,
High Beam Assist Malfunction
and Limitations
High Beam Assist malfunction
) indicator light
When High Beam Assist is not working
properly, the 'Check High Beam Assist
(HBA) system' or 'Check HBA (High
Beam Assist system' warning message
will appear and
illuminate on the cluster. The function
be inspected by an authorized HYUNDAI
dealer.
high beam switches to low beam if
any of the following conditions occur:
- When the headlamp of an
oncoming vehicle is detected.
- When the tail lamp of a vehicle in
front is detected.
- When the headlamp or tail lamp of a
motorcycle or a bicycle is detected.
- When the surrounding ambient light
is bright enough that high beams
are not required.
- When streetlights or other lights are
detected.
warning light will
OTM050218N