Hyundai Santa Fe 2022 Owner's Manual page 452

Warning volume
With the engine on, select 'Driver
Assistance → Warning Volume' from the
Settings menu to change the Warning
Volume to 'High', 'Medium' or 'Low' for
Blind-Spot Collision-Avoidance Assist.
However, when Warning Volume is
turned Off, the steering wheel vibration
function will turn on if it was turned Off.
If you change the Warning Volume,
the warning volume of other Driver
Assistance systems may change.
CAUTION
• The setting of the Warning Timing
and Warning Volume applies to all
functions of the Blind-Spot Collision-
Avoidance Assist.
• Even though 'Normal' is selected
for Warning Timing, if vehicles
approache at high speed, the initial
warning activation time may seem
late.
• Select 'Late' for Warning Timing
when traffic is light and when driving
speed is slow.
Blind-Spot Collision-Avoidance
Assist Operation
Warning and control
OTM070141N
Vehicle detection
• To warn the driver a vehicle is
detected, the warning light on the
side view mirror and head-up display
(if equipped) will illuminate.
• Blind-Spot Collision-Avoidance Assist
will operate when your vehicle speed
is above 12 mph (20 km/h) and the
speed of the vehicle in the blind spot
area is above 7 mph (10 km/h).
07
OHY059034
7-41