Hyundai Santa Fe 2022 Owner's Manual page 480

Smart Cruise Control Reaction
With the engine on, select 'Driver
Assistance → SCC response' from the
settings menu to select the sensitivity of
vehicle speed when following the front
vehicle to maintain the set distance.
Warning Volume
With the engine on, select 'Driver
Assistance → Warning Volume' from the
Settings menu to change the Warning
Volume 'High', 'Medium' or 'Low' for
Smart Cruise Control.
If you change the Warning Volume,
the Warning Volume of other Driver
Assistance systems may change.
Information
If the engine is restarted, Warning Volume
will maintain the last setting.
Smart Cruise Control Operation
Operating conditions
Smart Cruise Control will operate when
the following conditions are satisfied.
Basic function
• The gear is in D (Drive)
• The driver's door is closed
• EPB (Electronic Parking Brake) is not
applied
OTM070142N
• Your vehicle speed is within the
operating speed range
- 5~110 mph (10~180 km/h): when
there is no vehicle in front
- 0~110 mph (0~180 km/h): when
there is a vehicle in front
• ESC (Electronic Stability Control), TCS
(Traction Control System) or ABS is on
• ESC (Electronic Stability Control), TCS
(Traction Control System) or ABS is not
controlling the vehicle
• Engine rpm is not in the red zone
• Forward Collision-Avoidance Assist
brake control is not operating
• Remote Smart Parking Assist brake
control is not operating
OTM070141N
Information
At a stop, if there is a vehicle in front of
your vehicle, Smart Cruise Control will
turn on when the brake pedal is depressed.
07
7-69