TABLE OF CONTENTS Dear Customer 1. Setting up and using the VARIFLOW/VARIFLOW 8........4 Thank you for purchasing this Airbox product. To ensure that you get the best possible use from it, please read this manual carefully. 1.1 Charging the battery......................4 1.2 Running the VARIFLOW/VARIFLOW 8 from the mains.........
The VARIFLOW/VARIFLOW 8 1. Setting up and using the VARIFLOW/VARIFLOW 8 pump Before you use the VARIFLOW/VARIFLOW 8 pump make sure it is fully charged. A battery level indicator shows the available power when the unit is first switched on.
VARIFLOW Press start/pause the pump runs and the timer starts counting, (you can pause Before switching on the VARIFLOW connect a flow meter to the air sampling head. during the test by pressing start/pause) start/pause Press to switch on the unit. The display will show, in this order, the serial number, stop when the test is complete and the display shows ‘Test Stop? Are you...
2. Maintenance 2.3 Cleaning the unit The casing of the VARIFLOW/VARIFLOW 8 pump is made from a hard wearing ABS 2.1 Replacing the battery structural foam, making it incredibly rugged and also very easy to clean. Tested to The VARIFLOW/VARIFLOW 8 pump has been specifically designed to make IP65 standards (‘Protected against low pressure water jets from any direction.
The defect must not have been caused by improper handling or misuse. EU charger) c) Return the unit to us in the decontamination bag provided by Airbox. We will not VARIFLOW Air Sampling Pump (with UK/ assume responsibility for transport damage under any circumstances.
Need help?
Do you have a question about the VARIFLOW and is the answer not in the manual?
Questions and answers