Related Manuals for McIntosh HT30-IW
Summary of Contents for McIntosh HT30-IW
- Page 1 Loudspeaker Systems In-wall On-wall HT30-IW/HT30-OW Installation Guide McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549...
-
Page 2: Safety Instructions
Customer Service openings. If it is determined that your McIntosh product is in need of Repair of Equipment: repair, you can return it to your Dealer. You can also return 14. Refer all servicing to qualified service personnel. Servicing it to the McIntosh Laboratory Service Department. -
Page 3: Table Of Contents
System have also been designed for high efficiency. As a the HT30 Loudspeaker System. result any McIntosh Power Amplifier, even our smallest, 2. The HT30’s built-in speaker protection incorporates will provide satisfying room filling sound, yet they can be an automatic resetting solid-state device in the cross- used with amplifiers up to 200 watts. -
Page 4: Dimensions
Dimensions The following dimensions can assist in determining the best location for the HT30 Loudspeaker System. HT30-OW On Wall Loudspeaker HT30-IW In Wall Loudspeaker Front View without grille Front View without grille " -1/2 " -1/2 34.30 34.30 " -1/4 "... -
Page 5: Installation
Location in the Room This is perfectly acceptable and can be achieved by mount- The McIntosh HT30 Loudspeaker is specifically optimized ing the HT30 Loudspeakers so that the listener is not in the for Surround Sound Applications. The Loudspeakers are... - Page 6 Follow the instructions below for unpacking and assembly. It is recommended that the Professionals at your McIntosh Dealer, who are skilled in all aspects of installation and operation, install the HT30 Loudspeaker System and any associated audio equipment.
- Page 7 HT30-IW In Wall Mount 1. Determine the location where you wish the HT30-IW 7. Place the trim frame in position over the HT30-IW and Loudspeakers to be installed in the wall using the sup- secure it to the Loudspeaker system using the supplied plied template.
-
Page 8: How To Connect The Loudspeaker
How to Connect the Loudspeaker How to Connect the Loudspeaker 3. Connect a Loudspeaker cable from the HT30 (-) Bind- Caution: The AC Power Cord should not be connected to the Power Amplifier until after the Loudspeaker Con- ing Post to the (-) (4Ω) Binding Post of the Power nections have been made. -
Page 9: Warranty
Speaker is at the time of delivery within the scope of his solely upon your seller and not upon McIntosh. If you have been misled in any way on Warranty, by either having completed and submitted to McIntosh on a timely basis the this subject, you should make immediate inquiry of your seller. -
Page 10: Specifications
HT30-OW On Wall Shipping Carton Dimensions Width is 22- 1/2 inches (57.15cm) Depth is 18 inches (45.72cm) Height is 19- 1/4 inches (48.90cm) HT30-IW In Wall Shipping Carton Dimensions Width is 17-3/4 inches (45.08cm) Depth is 14-1/8 inches (35.88cm) Height is 19-3/8 inches (49.21cm) -
Page 11: Packing Instructions
If a shipping shipping carton carton or any of the interior part(s) are needed, please call or write Customer Service Department of McIntosh Laboratory. HT30 OW On Wall Packing HT30 IW In Wall Packing... - Page 12 McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, NY 13903 The continuous improvement of its products is the policy of McIntosh Laboratory Incorporated who reserve the right to improve design without notice. Printed in the U.S.A. McIntosh Part No. 04129300...