Page 1
In-Wall Mounting Kit with Grille CK27 Installation Guide McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549...
Note: Save the just removed sons to safely handle during assembly and placement. If screws and Wall Bracket for the CK27 In-Wall Mounting Kit with Grille is for install- possible future use. ing an unboxed XR27, proceed to “Unpacking the Loud- 8.
Page 3
System before cutting into the wall. The carton bottom. Take the two center pieces of the just CK27 is designed for attaching to wall headers with removed packing material and lay it down flat onto 16 inch (40.64cm) centers. Refer to figure 12.
Page 4
10 x 2-1/2 inch screws. Refer to figure 14. 34. Attach the supplied McIntosh Logo to either the bot- tom front of the Loudspeaker Grille or the front baffle board behind the Grille.