Install Mounting Bracket; Account Setup Power Network/Mounting Access Control; Network/Mounting - Chamberlain CAPXS Installation Manual

INTRODUCTION
1

Install Mounting Bracket

1. Mount the CAPXS Mounting Bracket securely to a flat surface or
INTRODUCTION
pedestal with appropriate (1/4 in.) flat head hardware for Surface
Mount or appropriate #6 Flat Head screw for Gang Box Mount.
Stainless steel hardware is recommended for mounting.
NOTES:
-ADA Compliance: When mounting the CAPXS at a pedestrian entrance, to
meet ADA compliance, mount the top of the CAPXS screen no higher than 54 inches from the ground.
INTRODUCTION
ACCOUNT SETUP
ACCOUNT SETUP
ACCOUNT SETUP
Surface Mount
POWER

NETWORK/MOUNTING

POWER NETWORK/MOUNTING
POWER NETWORK/MOUNTING
OR
11
ACCESS CONTROL
DO
Make sure the CAPXS is properly sealed to
prevent damage to the CAPXS from moisture.
ACCESS CONTROL
For rough surfaces such as brick, additional
sealing will be needed.
ACCESS CONTROL
Gang Box Mount