Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ironton 74935
Summary of Contents for Ironton 74935
- Page 1 14 oz. Lever Handle Grease Gun Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item #74935 READ & SAVE THESE INSTRUCTIONS...
- Page 2 Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it.
-
Page 3: Table Of Contents
Table of Contents Intended Use ............................4 Packaging Contents ..........................4 Technical Specifications ........................4 Important Safety Information ....................... 4 Specific Operation Warnings ....................... 6 Main Parts of Grease Gun ........................7 Assembly Instructions .......................... 7 Grease Loading Instructions ....................... 8 Before Each Use .......................... -
Page 4: Intended Use
Intended Use The Ironton 14-oz. Lever Handle Grease Gun features the convenience of three-way loading. • Lever handle requires low effort. • Air bleeder valve eliminates air lock. Packaging Contents • • • • 1/8 NPT Fixed Spout 7” Owner’s Manual... - Page 5 ⚠WARNING WORK AREA SAFETY • Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to cutting tools and rotating parts. •...
-
Page 6: Specific Operation Warnings
• Store the product when it is not in use. Store it in a dry, secure place out of the reach of children. Inspect the tool for good working condition prior to storage and before re-use. • Use only accessories that are recommended by the manufacturer for use with your product. Accessories that may be suitable for one product may create a risk of injury when used with another tool. -
Page 7: Main Parts Of Grease Gun
Main Parts of Grease Gun Reference Subassembly Lever Handle Tube Container Hydraulic Coupler Rigid Spout T-Handle Main Head Lock Assembly Instructions 1. Screw the tube container into the grease gun head. 2. Attach the rigid coupler assembly into the grease gun connector. Page 7 of 15... -
Page 8: Grease Loading Instructions
The complete assembly is shown below. Grease Loading Instructions Cartridge Loading 1. Remove the tube container from the main head. 2. Pull back on the T-handle until it is fully extended. Lock it into place with the locking plate. 3. Remove the cap and/or lid from both ends of the cartridge (not included). Insert the cartridge into the tube container in the direction indicated on the cartridge. - Page 9 4. Reconnect the tube container to the main head. Press the locking plate to release the T-handle. Press the handle in as far as it will go. Make sure the end of the grease cartridge that is inserted into the tube container is not damaged or squeezed.
-
Page 10: Before Each Use
5. Press the locking plate to release the T-handle. Press the handle in as far as it will go. Removing Trapped Air After filling the grease gun, remove any trapped air by following these steps: 1. After filling the tube container with grease (using any of the previously mentioned methods) and reassembling the gun, keep the barrel at least 2-3 turns open. -
Page 11: Operating Instructions
Operating Instructions ⚠WARNING • Always wear the proper protective equipment, including ANSI Z87.1 compliant eye protection. • High Pressure Fluid Hazard. Do not use a hose pressure rating that is less than the grease gun. • Do not exceed the max pressure of 8000 PSI. •... -
Page 12: Maintenance
Maintenance Maintain the grease gun by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. It is recommended that the general condition of any tool be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from oil and grease. -
Page 13: Parts Diagram
Parts Diagram Parts List Part Number Reference Numbers Part Description Quantity 504-1 Handle Lever 504-2 Handle Grip 504-3 Tube Container 504-4 T-Handle 504-5 Lock 504-6 Spring 504-7 Rigid Spout 504-8 Hydraulic Coupler 504-9 Plunger Assy. 504-10 Air Filler Replacement Parts •... -
Page 14: Limited Warranty
Northern Tool and Equipment Company, Inc. ("We'' or ''Us'') warrants to the original purchaser only (''You'' or ''Your'') that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. - Page 15 Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.com Made in India Page 15 of 15...
Need help?
Do you have a question about the 74935 and is the answer not in the manual?
Questions and answers