Advertisement
Connection Table
During configuration, the OmniPL will identify the pool equipment using the Connection ID shown on the table below. You'll be prompted to provide which pool
equipment is connected to each Connection ID. Because the control was previously wired, take this time to go through each connection and fill out the table.
Refer to the graphic below for the physical location of these connections.
ID
When using Optional Smart Relays
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
HVR1
HVR2
HVR3
HVR4
HVR5
HVR6
HVR7
HVR8
7
Advertisement
