Setting Up Your Oven - Toshiba ML2-EM09PA(BS) Instruction Manual

SETTING UP YOUR OVEN

TURNTABLE INSTALLATION
Cleaning the cooking compartment and putting the turntable in place. For new installations,
make sure all packaging and shipping tape has been removed from the turntable shaft. Before
using the appliance to prepare food for the first time, you will need to put the turntable in place
correctly. You must clean the cooking compartment and accessories.
How to put the turntable in place:
1. Place the roller ring
the cooking compartment.
2. Place the glass tray
ring. Fit the raised, curved lines in the
center of the glass tray bottom between
the three spokes of the shaft. Make
sure that the turntable a engages in
the turntable shaft
the cooking compartment floor. The
rollers on the shaft should fit inside the
turntable bottom ridge.
• Never use the appliance without the
turntable.
Make sure that it is properly engaged.
The turntable can turn clockwise or
anti-clockwise.
• Never place the glass tray upside
down.
The glass tray should never be
restricted.
• Both glass tray and turntable ring
assembly must always be used during
NOTE
cooking.
• All food and containers of food are
always placed on the glass tray for
cooking.
• Never restrict the movement of the
turntable.
• If glass tray or turntable ring assembly
cracks or breaks, contact your nearest
authorized service center.
b into the recess in
a on the Turntable
c in the centre of
Hub (underside)
d
EN-15
a Glass tray
b
Turntable ring
c Turntable shaft & Hub