Troubleshooting - Tesla 22MC625BF User Manual

ENG
Color Setting
Picture Quality
Setting
Display
Audio
Image setup
OSD
Other
3. To return to the upper menu, to set other menu items, move the joystick left.
4. If you want to exit from the OSD menu, move the joystick left until you exit.

TROUBLESHOOTING

If you have problems with your monitor, please check the table below for a possible solutions.
Problem
No picture visible
Wrong or abnormal
colors
Menu
Color Temperature
Saturation
Low Blue Light
Gamma
Color gamut
HDR
Aspect Ratio
AMD FreeSync
Overdrive
Mute
Volume
Auto config.
Auto color
H-Position
V-Position
Clock
Phase
Language
OSD H-position
OSD V-position
OSD Transparency
OSD Time out
Off Timer
Reset
Possible Solution
• Check if the monitor is turned on.
• Check if the power cord is properly connected to the monitor.
• Check if the signal cable is properly connected at the back of the monitor.
• Check if the computer system is switched on and in power saving/standby mode.
• Using the OSD menu, adjust brightness and contrast.
• If any color (red, green, blue) is missing, check the signal cable to make sure it is
securely connected. Loose or broken pins in the cable connector could cause an
improper connection.
• Connect the monitor to another computer.
Select color temperature mode or allow manual color
configuration
Adjust display saturation
Blue light reduction adjustment
Set gamma
DCIP3/Adobe/sRGB
Auto/HDR 2084/OFF
Set screen aspect ratio
Turn AMD FreeSync on/off
Adjusts the response time. The image can be blurred if the user
turns on the Overdrive.
Turn mute mode on/off
Adjusts the volume of earphones output.
/
/
0 - 100
0 - 100
0 - 100
0 - 100
Allow users to choose from available languages
Horizontally adjusts the OSD position.
Vertically adjusts the OSD position.
Adjusts the OSD transparency value.
Automatically turns off On Screen Display (OSD) after a preset
period of time.
The monitor will automatically power off after a preset period of
time (1 ~ 24 hours). The default off time is 4 hours. To disable this
feature, select the value Off.
Restores the default settings.
* Depending on the monitor model, the user interface may differ
6
Description