Creating A Zvol; Drive Identification - OWC Jupiter Callisto Quick Start Manual

4.2.6 Creating a Zvol

Zvols can be created directly from the pool or from a filesystem. To create a zvol, select the pool or the filesystem that
you want to use as the parent, then click the "Create zvol' button at the bottom of the screen to bring up the following
window. (Figure 4.2.6)
Give the zvol a name, then click on ' A dd zvol' to create the zvol. Note that unlike a filesystem, a zvol does need to have a
specific size.

4.3 DRIVE IDENTIFICATION

In order to view the drives installed in the Callisto, click on the 'View Disks' button inside the 'Storage' tab (see Figure 4.3a).
Figure 4.3a
OWC JUPITER CALLISTO
Figure 4.2.6
15
STORAGE CONFIGURATION