Do not leave the device unattended during operation. • Check accessories and connection parts for possible damage prior to every use of the device. Do not use any defective devices or device parts. floor fan TVM 18 S...
Page 3
Order a new power cable with mains plug from Warning Trotec and replace the defective power cable with mains Dangers can occur at the device when it is used by plug with the new one.
• Store the device in a dry location and protected from frost and heat. • If required, use a cover to protect the device from invasive dust. • Place no further devices or objects on top of the device to prevent it from being damaged. floor fan TVM 18 S...
1. Move the fan head forward or back so that it is slightly inclined either to the front or to the rear. ð The fan's inclination angle has been set and the air will flow out at the selected inclination angle. 110° floor fan TVM 18 S...
• Insert the mains plug into a properly fused mains socket. Technical annex. Positioning Operation Operating elements Designation Meaning Fan stage buttons Setting the fan speed: Stage 1 = low Stage 2 = medium Stage 3 = high Switching the device off 0 button floor fan TVM 18 S...
Only then switch the device back on. The device still does not operate correctly after these checks: Please contact the customer service. If necessary, bring the device to an authorised specialist electrical company or to Trotec for repair. floor fan TVM 18 S...
30 cm aggressive cleaning agents such as cleaning sprays, sides (C): 30 cm solvents, alcohol-based or abrasive cleaners to dampen front (D): 30 cm the cloth. • Other than that, the device does not require maintenance. floor fan TVM 18 S...
Only for United Kingdom According to Waste Electrical and Electronic Equipment Regulations 2013 (SI 2013/3113) devices that are no longer usable must be collected separately and disposed of in an environmentally friendly manner. floor fan TVM 18 S...
Need help?
Do you have a question about the TVM 18 S and is the answer not in the manual?
Questions and answers