Chapter 2: Removing And Installing Components; Recommended Tools; Screw List - Dell Inspiron 16 5620 Service Manual

Removing and installing components
NOTE: The images in this document may differ from your computer depending on the configuration you ordered.

Recommended tools

The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Plastic scribe

Screw list

NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
Base cover
Battery
Wireless card
Solid-state drive
Solid-state drive
Fan
Heat sink
Screw type Quantity
M2x7.5 - captive 2
screws
M2x4 7
M2x3 5
M2x3 1
M2x3 1
M2x1.8 1
M2x3 2
captive screw ● 7, for computers
● 4, for computers
with discrete graphics
processing units
without discrete graphics
processing units
Removing and installing components
Screw image
2
9