Yamaha BOLT 2019 Owner's Manual page 72

Periodic maintenance and adjustment
6
1. Ignition fuse
2. Signaling system fuse
3. Taillight fuse
4. Backup fuse (for clock)
5. Headlight fuse
6. Spare fuse
7
TIP
To access the fuel injection system
fuse, remove the starter relay cover by
pulling it upward.
1
2
3
4
5
1. Starter relay cover
2. Fuel injection system fuse
3. Fuel injection system spare fuse
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
2
1
3
[EWA15132]
7-30
Specified fuses:
Main fuse:
40.0 A
Headlight fuse:
20.0 A
Taillight fuse:
7.5 A
Signaling system fuse:
7.5 A
Ignition fuse:
15.0 A
Fuel injection system fuse:
10.0 A
Backup fuse:
7.5 A
3. Turn the key to "ON" and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.