1. Safety
1.1
Servicing safety instructions
W
ARNING
oughly familiar with the product and all of the proper safety checks of this product.
Safety precautions:
•
Follow all servicing and safety instructions mentioned in the servicing procedures.
•
Unplug the tile AC power cord from the AC power source and wait about 10 minutes before start any servicing to the tile. This
to allow the capacitors to discharge.
•
Some boards contains electrostatically sensitive devices (ESD). Take the necessary precautions to prevent the incidence of
component damage caused by static electricity.
•
Do not modify and/or replicate any component. Barco uses specific materials and manufacturing processes in order to achieve
part strength. No other parts then Barco parts are allowed.
Hazardous products:
This kit contains hazardous products. These products are labeled with a hazard sign. Make sure you understand the hazard labels.
Take the necessary precautions to work with these products and handle appropriate with these products.
W
ARNING
Hazardous product. Irritating to eyes and skin. Always use in a well ventilated area. Vapors may cause drowsi-
ness and dizziness. Avoid contact with skin and eyes. In case of contact with the eyes, rinse immediately with
plenty of water and seek medical advise.
C
AUTION
Hazardous product. Highly flammable. Always use in a well ventilated area. Keep away from sources of
ignitions. Do not smoke while working with soldering flux. Exclusive keep in original container tightly closed
at a cool, well ventilated and fireproof storage space.
4
:
Servicing must be done by authorized and qualified technical personnel only, which are thor-
:
SOLDERING FLUX (IF 2005 M).
:
SOLDERING FLUX (IF 2005 M).
R5976460 ILITE LED REPLACEMENT KIT 29/03/2007