3.15 Installing the cover
Ensure that the power unit and fan are installed correctly. The wire unit of the fan must be plugged into the
socket on the power unit.
Necessary tools
•
Torx T20.
•
7 mm nut driver.
How to install the cover ?
1. Place the cover (L) upon the tile (F).
F
Image 3-25
2. Fasten the cover with six screws (P). One screw in each corner and one under each handle.
R5976460 ILITE LED REPLACEMENT KIT 29/03/2007
3. Replacing a bad LED from an ILite LED board
L
P
31